NHandset Settings
Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or daily. Set the date and time beforehand (page 11).
1"(middle soft key) i Ni #
2“Time Settings” i #
3“Alarm” i#2 times
4Select an alarm mode. i #
Off | Turns alarm off. Press # |
| again, then press {ih} to |
| finish. |
Once | The alarm sounds once at the |
| set time. Enter the desired |
| day and month. |
Daily | An alarm sounds daily at the |
| set time. |
5Enter the desired hour and minute. i
#
6Select the desired ringtone. i #
7“Save” i#i {ih}
LWhen the alarm is set, eis displayed.
Note:
LTo stop the alarm, press any dial key.
LWhen in talk or intercom mode, the alarm will not sound until the call has ended.
LIf you select “Once”, the setting will change to “Off” after the alarm sounds.
Ringer setup
Night mode
Night mode allows you to select a block of time during which the handset will not ring for outside calls. This feature is useful for
times when you do not want to be disturbed, for example, while sleeping.
Using the handset phonebook’s category feature (page 15), you can also select categories of callers whose calls will override night mode and ring the handset (Caller ID subscribers only).
Set the date and time beforehand (page 11).
Note:
LWe recommend turning the base unit ringer off (page 22) in addition to turning the night mode feature on.
Setting the start and end time for night mode
1"(middle soft key) iNi #
2“Ringer Setup” i#
3“Night Mode” i #
4“Start/End” i #
5Enter the desired hour and minute you wish to start this feature.
6Enter the desired hour and minute you wish to end this feature.
7#i{ih}
Turning night mode on/off
1"(middle soft key) iNi #
2“Ringer Setup” i#
3“Night Mode” i #
4“On/Off” i #
5“On” or “Off” i #i{ih} LWhen the night mode is set, fis
displayed.
20