Panasonic KX-TG1861NZ Call options, Selecting area codes to be deleted automatically

LTo erase a restricted number, press {C/T}.

23

Select a memory location. i #

#

6

7

8 Enter the phone number or area code to be restricted (8 digits max.). i# i {ih}

LBase Unit Settings

5 Set which handsets will be restricted by pressing the desired handset number.

LAll the registered handset numbers will be displayed.

LFlashing numbers indicate call restriction is turned on for the corresponding handset.

LTo turn call restriction off for a handset, press the number again. The number will stop flashing.

Call options

Selecting area codes to be deleted automatically

In some situations, phone numbers stored automatically in the Caller ID list (page 25) will include area codes. If you do not want to dial the area codes when making calls from the Caller ID list, you can store the area codes which you want the unit to delete automatically.

Example: You have stored the area code “09”. If you make a call from the Caller ID list to the phone number “09-456-7890”, the unit dials “456-7890”.

1"(middle soft key) i Li#

2“Call Options” i #

3“Area Code” i#

4Enter an area code (5 digits max.). i

#i {ih}

Note:

LThe use of this feature can prevent a National Call from being dialled. E.g., in the case of the South Island, the “03” will be omitted and will therefore prevent a National Call to other areas of the South Island.

Setting call restriction

You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets will be restricted. Storing area codes here will prevent the restricted handsets from dialling any phone number in that area code.

1"(middle soft key) i Li#

2“Call Options” i #

3“Call Restrict” i #

4Enter the base unit PIN (default: “0000”).