Increasing the range of the base unit
You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Consult your Panasonic dealer for details.
Important:
LBefore registering the repeater to this base unit, you must turn the repeater mode on.
LDo not use more than one repeater at a time.
Setting the repeater mode
1"(middle soft key) i Li#
2“Other Options” i #
3“Repeater Mode” i #
4“On” or “Off” i#i {ih}
Note:
LAfter turning repeater mode on or off, w will flash on the handset momentarily. This is normal. The handset can be used once w stops flashing.
Intercom between handsets
Intercom calls can be made between handsets in the same radio cell. Example: When handset 1 calls handset 2
1Handset 1:
{INT} i Press {2} (desired handset number).
2Handset 2:
Press {C} / {s} to answer.
3When finished talking, press {ih}.
Transferring calls between handsets, conference calls
Outside calls can be transferred between 2 people in the same radio cell. 2 people in the same radio cell can have a conference call with an outside party.
Example: When handset 1 transfers a call to handset 2
1Handset 1:
During an outside call, press {INT}. i Press {2} (desired handset number). LThe outside call will be put on hold. LIf there is no answer, press {INT} to
return to the outside call.
2Handset 2:
Press {C} / {s} to answer the page. LHandset 2 can talk with handset 1.
3Handset 1:
To complete the call transfer, press
{ih}.
To establish a conference call, press
{3}.
Transferring a call without speaking to the other handset user
1During an outside call, press {INT}. i Press the desired handset number.
Lkflashes to indicate the outside call is on hold.
2{ih}
LThe outside call rings at the other handset.
Note:
LIf the other handset user does not answer the call within 1 minute, the call will ring at your handset again.
29