Voice Mail Service
To erase the Voice Mail access number
1 {MENU} (middle soft key) i {#}{3}{3}{1}
2 Press and hold {CLEAR} until all digits are erased.
3 {SAVE} i{OFF}
Listening to Voice Mail messages
The unit lets you know that you have new Voice Mail messages in the following ways:
–The {VM} button on the base unit flashes.
–“New Voice Mail” is displayed on the handset.
–The message indicator on the handset slowly flashes blue if the message alert feature is turned on (page 54).
Handset
1 Press {C}, then press {VM} within 15 seconds.
LIf {VM} is not displayed, the Voice Mail access number has not been stored. Store the number (page 52).
OR
{MENU} (middle soft key) i{VM}
2 Follow the prerecorded instructions.
3 Press {OFF} when finished.
Base unit
1 {VM}
LIf the base unit beeps 3 times, the Voice Mail access number has not been stored. Store the number (page 52).
2 Follow the prerecorded instructions.
3 Press
Note for handset and base unit:
LIf the handset or base unit still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {OFF} on the handset until the handset beeps.
LIf your Voice Mail service uses Voice Mail tones and the message is over 3 minutes long, the handset may not indicate new messages.
LIf your Voice Mail service uses Voice Mail tones, the tones are heard from any phone connected to the same line. If you want to use another phone to listen to Voice Mail messages, you have to dial your access number manually.
For assistance, please visit http://www.panasonic.com/phonehelp | 53 |