Useful Information
Making/answering calls, intercom
Problem | Cause/solution |
w is displayed, but I | LThe handset and base unit could not communicate for |
cannot make a call. | some reason, such as interference from other electrical |
| appliances. Perform the following: |
| – Move the handset and base unit away from other |
| electrical appliances. |
| – Move closer to the base unit. |
| – Raise the base unit antennas. |
|
|
Static is heard, sound | LMove the handset and base unit away from other |
cuts in and out. | electrical appliances. |
Interference from other | LMove closer to the base unit. |
electrical units. | LRaise the base unit antennas. |
| LTurn on the clarity booster feature (page 27). |
| LIf your unit is connected to a telephone line with DSL |
| service, we recommend connecting a noise filter |
| between the base unit and the telephone line jack. |
| Contact your DSL provider for details. |
The handset and base | LThe ringer volume is turned off. Adjust it (page 26, 45). |
unit do not ring. |
|
|
|
I cannot make a call. | LThe dialing mode may be set incorrectly. Change the |
| setting (page 23). |
| LThe base unit or another handset is in use. Try again |
| later. |
|
|
I cannot redial by | LIf the last number dialed was more than 48 digits long, |
pressing {REDIAL}. | the number will not be redialed correctly. Dial the |
| number manually. |
I cannot have a | LMake sure that an optional headset is connected |
conversation using the | properly (page 60). |
headset. |
|
|
|
I cannot make long | LMake sure that you have long distance service. |
distance calls. |
|
I cannot page the | LThe called handset is too far from the base unit. |
handset or base unit. | LThe called unit is in use. Try again later. |
|
|
I cannot turn the clarity | LAnother handset is already using this feature. |
booster on. |
|
|
|
64For assistance, please visit http://www.panasonic.com/phonehelp