Auto intercom/Room monitor
This feature allows you to:
–answer an intercom call without pressing any buttons on the handset.
–listen to the sound in a room where the handset is located.
Turning auto intercom on/off
“Off” (Default): Turns this feature off.
“On(Ringer On)”: When an intercom call is received, the handset rings 2 times then the speakerphone is automatically turned on.
“On(Ringer Off)”: When an intercom call is received, the handset does not ring and the speakerphone is automatically turned on. This allows you to easily monitor a baby’s room, for example, from different areas of the house.
Handset
1 {MENU} (middle soft key) i {#}{2}{7}{3}
2 Select the desired setting.
3 {SAVE} i{OFF}
Note:
LThis feature cannot be used when the base unit is paging all handsets, or when receiving a transferred call.
Answering an intercom call using auto intercom
Handset
1 When you are paged by the base unit or another handset, speak into the microphone.
LTo switch to the receiver, press {C}.
2 To end the intercom, press {OFF}.
Note:
LAuto intercom cannot be used when:
–all handsets are being paged by the base unit.
–your handset is receiving a transferred outside call.
Monitoring audio in a room
With a handset or the base unit, you can listen to the sound in a room where another handset is located.
Important:
LBefore using this feature, set auto intercom of the destination handset to “On(Ringer Off)” to allow access by other handsets.
Handset
1 Call the destination handset (page 55). LYou can listen to the audio.
2 To mute your sound output, press {MUTE} if necessary.
3 Press {OFF} to stop monitoring.
Base unit
1 Call the destination handset (page 55). LYou can listen to the audio.
2 To mute your sound output, press {MUTE} if necessary.
3 Press {INTERCOM} to stop monitoring.
56For assistance, please visit http://www.panasonic.com/phonehelp