LCD Contrast
You can select the LCD contrast level from 1 to 4 by programming. Your phone comes from the factory set to 2.
Make sure that the handset is on the cradle.
1 | Press [FUNCTION/EXIT]. |
| |
2 | Scroll to “LCD CONTRAST ?” by |
| |
LCD CONTRAST ? | |||
pressing [▼] or [▼]. | |||
3 | Press [ENTER]. |
| |
| |||
| |||
| • The current setting is displayed. |
| |
4 |
|
| |
Select the desired contrast by pressing [▼] or [▼]. | |||
| • Each time you press [▼] or [▼], the LCD contrast will change. | ||
5 | Press [ENTER]. |
| |
SAVED | |||
| • The display will return to step 2. To exit |
| |
| the programming mode, press |
| |
| [FUNCTION/EXIT] or wait for |
| |
| 60 seconds. |
|
• You can exit the programming mode any time by pressing [FUNCTION/EXIT].
Ringer Volume
You can select the ringer volume to HIGH, LOW or OFF. Your phone comes from the factory set to HIGH.
RINGER Selector: |
|
|
Set to HIGH, LOW or | RINGER | |
OFF. | HIGH | OFF |
≥When set to OFF, the unit will not ring.
Preparation
For assistance, please call: | 11 |