Using the Caller List
5 | After editing, you can continue with calling back or storing |
procedures. |
•To call back, lift the handset.
•To store the number in the Phone book memory, follow steps 4 to 5 on page 20 to complete the operation.
•If Caller ID Number Auto Edit is turned on (factory preset is on), phone numbers with the same area code as the number you edited will now be updated in the Caller List and each time you receive a call.
•To save the edited number into the Phone Book, press [ENTER].
•To exit the Caller List during editing, press [FUNCTION/EXIT] or wait for 60 seconds.
Storing Caller List Information in the Phone Book List
You can store numbers in the Caller List to the Phone Book List.
Make sure that the handset is on the cradle.
1 | Press [▼] or [ ] to enter the Caller List. |
|
|
|
2 | Scroll to the caller you want to store by |
| SMITH,JOHN |
|
|
| |||
pressing [▼] or [ ]. |
|
| ||
|
|
| 10:50AM 11/23 | NEW x4 |
▼
3 Press [ENTER].
•If the number requires editing, see page 19.
4 Press [ENTER]. |
|
|
|
|
| MITH,JOHN | |
S |
If there is no name information for the caller, “ENTER NAME” will be displayed.
a)If a name is required, enter the name (p. 24). When finished, go to step 5.
b)If a name is not required, go to step 5.
If there is name information for the caller, you can edit name information.
a)If you need to change the name, enter the name (p. 24). When finished, go to step 5.
b)If you do not need to change the name, go to step 5.
20