Settings
Installing the Batteries
- +
+-
-
+
2
1
1 Press down in the direction of the arrow and remove the battery cover ( 1 ).
2 Install the batteries in the proper order as shown ( 2 ), matching the correct polarity.
3 Close the battery cover.
•Batteries are not included in the unit.
•Install three high quality “AA” size Alkaline (LR6) or Manganese (R6,
Battery life is:
Battery life may depend on usage conditions and ambient temperature.
•Make sure batteries were inserted properly to ensure the functionality of this unit.
THE UNIT MAY NOT WORK PROPERLY WITHOUT BATTERIES.
Connecting the Handset/Telephone Line Cord
After connection, lift the handset to check for a dial tone.
To |
|
Telephone Jack | Noise filter |
(RJ11C) | (For xDSL users) |
Telephone Line
Cord
If you subscribe to an xDSL service
Handset
Handset Cord
Please attach a noise filter (contact your xDSL provider) to the telephone line between the base unit and the telephone line jack in the event of the following:
—Noise is heard during conversations.
—Caller ID features (p. 16) do not function properly.
6