Setting the Password
You can change the password for the call restriction. The factory preset password is “1111”.
To set the password
Make sure that the handset is on the cradle.
1 | Press [FUNCTION/EXIT]. |
2 | Scroll to “CHANGE PASSWORD?” by |
pressing [▼] or [▼]. | |
3 | Press [ENTER]. |
4 | Enter the current password. |
5 Press [ENTER].
•If the wrong password was entered at step 4, “ERROR” will be displayed, then “– – –
correct password.
CHANGE PASSWORD?
CURRENT PASSWORD
:
NEW PASSWORD
6 | Enter a new password using a | :123 |
|
|
number. (Ex. “1234” is entered.) | 4 |
| ||
| ||||
7 | Press [ENTER]. |
| ||
| ||||
SAVED | ||||
| • The display will return to step 2. To exit |
|
|
|
| the programming mode, press |
|
|
|
| [FUNCTION/EXIT] or wait for |
|
|
|
| 60 seconds. |
|
|
|
• You can exit the programming mode any time by pressing [FUNCTION/EXIT].
Please write down your password. If you forget your password, consult your nearest Panasonic service center.
Advanced Operation
For assistance, please call: | 31 |