Special Features
Call Waiting Caller ID Feature
Call Waiting Caller ID Feature allows your unit to display the second caller’s information. After you hear a
•Please contact your telephone company for details and availability in your area.
SMITH,JOHN
12:34PM 11/24
12:34PM 11/24
Mute
Press [MUTE] while talking. “ ” will be displayed.
•The other party cannot hear you but you can hear them.
•To resume the conversation, press [MUTE] again.
FLASH Button
Pressing [FLASH] allows you to use special features of your host PBX such as transferring an extension call or accessing special telephone services (optional) such as call waiting.
Selecting the flash time
The flash time depends on your telephone exchange or host PBX. You can select the following flash times: “80, 90, 100, 110, 200, 250, 300, 400, 600, 700 ms (milliseconds)”. Your phone comes from the factory set to “600 ms”.
Make sure that the handset is on the cradle.
1 | Press [FUNCTION/EXIT]. |
2 | Scroll to “SET FLASH TIME ?” by |
pressing [▼] or [▼]. | |
3 | Press [ENTER]. |
4 | Select the desired time by pressing |
[▼] or [▼]. |
5 Press [ENTER].
•The display will return to step 2. To exit the programming mode, press [FUNCTION/EXIT] or wait for
60 seconds.
SET FLASH TIME ?
:600MS
SAVED
•You can exit the programming mode any time by pressing [FUNCTION/EXIT].
•If the unit is connected via a PBX, PBX functions (transferring a call, etc.) might not work correctly. Consult your PBX supplier for the correct setting.
•If there is no battery, Flash function may not operate appropriately.
30