Voice Mail Tone
If your voice mail service sends a voice mail tone after a new message has finished recording, set to “ON”. “ ” icon will flash on the display if a message was recorded in your mailbox. You will hear a series of voice mail tones then a dial tone after lifting the handset.
(Contact your service provider about your service.) Set to “OFF” when:
Your phone comes from the factory set to “ON”.
Make sure that the handset is on the cradle.
Preparation
1
2
3
4
5
Press [FUNCTION/EXIT].
Scroll to “VM TONE DETECT ?” by pressing [▼] or [▼].
Press [ENTER].
Select “ON” or “OFF” by pressing [▼] or [▼].
Press [ENTER].
SAVE PHONEBOOK ?
VM TONE DETECT ?
:ON
SAVED
• You can exit the programming mode any time by pressing [FUNCTION/EXIT].
For assistance, please call: | 13 |