Panasonic KX-TDA30 Making a Call to a Private Network TIE Line Access, To call, Private phone no

1.2 Making Calls

To select the specified outside line

PT/PS

		outside
	(S-CO)	phone no.
Off-hook.	Press S-CO.	Dial outside phone	Talk.
		number.

• Each of the S-CO button or G-CO button light shows the current status as follows:

Off: The line is idle.

Red on: The line is in use.

•You may be restricted from making a call to the specified outside party. To make a call, refer to "1.2.7 Calling without Restrictions".

•To confirm number before dialling, you can enter a phone number and confirm it on the display and then go off-hook. (Predialling)

•Call Charge Reference

You can confirm your total call charges by pressing the Charge Reference button.

•To make a call to another party without going on-hook, press the FLASH/RECALL button. It will re-access the outside line and provide external dial tone. Pressing the Terminate button will provide intercom dial tone. You can dial the new phone number without going on/off-hook.

Customising Your Phone

•3.1.2 Settings on the Programming Mode–Preferred Line Assignment—OutgoingSelect the seized line when going off-hook.

•3.1.3 Customising the Buttons

Create or edit a Loop-CO (L-CO) button, a Group-CO (G-CO) button, a Single-CO (S- CO) button, a Terminate button or a Charge Reference button.

Making a Call to a Private Network (TIE Line Access)

When your PBX is connected to a private network, you can access it.

To call

PT/SLT/PS

	7	private phone no.
Off-hook.	Enter 7.	Dial private phone	Talk.
		number.

User Manual

25