Panasonic KX-TCD420AL Important Information, Instructions to customer, Installation

Page 3

Important Information

Instructions to customer

Installation

Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service.

Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5).

You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You may connect it in place of your existing telephone or to any spare telephone socket installed in your premises.

To disconnect your existing telephone you must first remove its plug from the line socket. You can then insert the plug of your Permitted Attachment into the socket and use your equipment.

If the plug of your existing telephone cannot be readily removed, you will have to remove the screw securing it. To do this proceed as follows:

1.Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.)

2.Remove screw “B” and withdraw the plug. (See Fig. 2.)

3.Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the socket recess. (If the screw is too long, increase the hole depth or replace the screw with one 5 mm shorter.)

4.Replace socket cover and tighten screw “A”. (See Fig. 4.)

SOCKET PLUG

 

 

 

SCREW

SCREW “A”

 

“B”

Fig. 1

TELEPHONE CORD

Fig. 2

Connect to the PLUG

 

)

 

( as shown in Fig. 1.

 

 

SCREW “A”

 

SCREW

 

 

“B”

SOCKET

Fig. 3

 

Fig. 4

Preparation

3

Image 3
Contents Model No. KX-TCD420AL ContentsBefore Initial Use Accessories includedInstallation Important InformationInstructions to customer Service difficulties Battery Caution EnvironmentLocation Setting up Battery InstallationConnection Fully charged Battery ChargeBattery Life Display icon Battery strengthSymbols Used in This Operating Instructions Selecting the Battery TypeReplacing the Batteries Base unit Location of ControlsHandset Display HandsetWall Mounting Making a Call Using the TelephonePower On/Off Setting the Clock/DateClearing One/All Dialled Items in the Redial List Making CallsRedialling Editing the Dialled Number in the Redial ListCaller ID Service Using Caller ID TypeCaller ID Caller ID Display Caller ID List Calling BackEditing the Received Number in the Caller List Temporary Bell Off Receiver VolumeAnswering Calls Auto TalkStoring a Caller Information PhonebookDialling with the Phonebook Editing a Caller InformationNumber Clearing a Caller InformationPhone Number *1 Name Clearing the Hot Key Registration Hot KeyRegistering a Phone Number as a Hot Key Dialling with Hot KeyBefore programming, please follow steps 1 to Handset SettingsTime Alarm Setting Time Alarm On/OffRinger Option Setting the Ringer VolumeSelecting the Standby Mode Display Tone OptionDisplay Option Digit Selecting the Talk Mode DisplayCall Option Call BAR On/OffSetting the Direct Call Number Setting the Direct Call On/OffOther Options Recall Feature Dialling Pause for PBX line/long distance service usersKey Lock Base Unit Settings Cancelling Call Restricted Handsets Digit Base UnitDigit Base Handset Number Unit PIN Cancelling Call Restricted Number Selecting the Recall TimePause Timing Initial Settings Reset Handset SettingsHandset Initial Settings Function Reset Base Unit Settings Base Unit Initial Settings FunctionDigit Base Unit PIN Multi-unit User Operation Digit Base Handset Number Cancelling a Base UnitCancelling a Handset Digit Handset PINNumber of Rings *2 Ringer Mode Selection Setting the All Handsets ModeSetting the Selected Handsets Mode Handset Numbers *1 Setting the Selected then All Handsets ModeBase Unit Selection Intercom Intercom between HandsetsTransferring a Call to Another Handset/Conference Call Summary of Answering System Answering SystemRecording Your Own Greeting Message Greeting MessagesPre-Recorded Greeting Messages To Playback Pre-Recorded/Your Own Greeting MessageIncoming/Memo Messages Recording a Memo MessagePlayback New/All Incoming/Memo Messages Selecting the Caller’s Recording Time Recording Your Telephone ConversationAnswering System On/Off Clearing All Incoming/Memo MessagesSelecting the Number of Rings Recording QualityMonitor Function On/Off Setting the Remote CodeTurning on the Answering System Remotely Direct Remote CommandsRemote Operation Remote Operation from a Touch Tone PhoneWords in mean a voice guidance Press Voice MenuBefore Requesting Help Problem Possible cause SolutionUseful Information Answering System Problem Possible cause Solution Specifications Technical InformationConnections PIN IndexPage Page Page PQQX13907ZA F0803-1093 For your future reference

KX-TCD420AL specifications

The Panasonic KX-TCD420AL is a versatile cordless phone model that exemplifies modern communication technology. Designed for convenience and ease of use, this phone comes equipped with a variety of features that make it an essential device for everyday communication needs.

One of the standout characteristics of the KX-TCD420AL is its DECT (Digital Enhanced Cordless Telecommunications) technology. This technology not only provides clear and stable sound quality but also enhances the range of the cordless phone, allowing users to move freely throughout their home or office while maintaining a strong connection. This feature is especially beneficial in larger spaces, where traditional telephones may struggle with signal strength.

The phone boasts a sleek and ergonomic design, making it comfortable to hold during long conversations. The large, illuminated LCD screen displays important information, including caller ID, allowing users to see who is calling before answering. This feature helps users manage their calls more effectively and avoids unwanted interruptions.

Another notable feature of the KX-TCD420AL is its extensive phonebook capacity, which can store up to 100 names and numbers. This enables users to easily keep track of important contacts and quickly dial frequently called numbers. Additionally, the phone is equipped with a redial function that allows users to easily call back the last dialed number, enhancing convenience even further.

For those who frequently receive calls, the KX-TCD420AL includes a built-in answering machine with a generous recording capacity. Users can record messages for up to 18 minutes, ensuring that they never miss an important call. Furthermore, the phone supports multiple handsets, allowing users to add additional cordless phones throughout their home or office, which can all connect to the same base unit.

The KX-TCD420AL is energy efficient, utilizing power-saving technology that helps reduce its environmental impact. The included rechargeable batteries provide long talk times, minimizing the need for frequent recharging, making it an eco-friendly option for communication needs.

In summary, the Panasonic KX-TCD420AL combines advanced communication technologies with a user-friendly design, making it an ideal choice for anyone looking for a reliable cordless phone. With features such as DECT technology, extensive phonebook capacity, an answering machine, and energy-efficient operation, it meets the needs of modern users who require both functionality and convenience in their daily lives.