TG5831_5832AL.book Page 29 Monday, March 14, 2005 4:28 PM
Intercom Features
Intercom
Intercom calls can be made between a handset and the base unit (and between 2 handsets,
Note:
L If you have difficulty hearing the other party while using the speaker, decrease the speaker volume.
L If you receive a phone call while talking on the intercom, you will hear 2 tones (page 34). To answer the call, press {OFF}, then press {C} or {s}.
L You cannot change the ringer tone for intercom calls.
For KX-TG5831AL users
From the handset to the base unit
1 Handset:
Press {INTERCOM}.
L The base unit will beep for 1 minute. L To stop paging, press {OFF}.
2 Base unit:
Press {LOCATOR/INTERCOM} to answer the page.
3 Handset:
When finished talking, press {OFF}.
Note:
L During an intercom call, the handset user can switch to the speaker by pressing {s}. To switch back to the receiver, press {C}.
L To adjust the base unit’s speaker volume, press {>} or {<} repeatedly. 8 levels (high to low) are available.
From the base unit to the handset
1 Base unit:
Press {LOCATOR/INTERCOM}.
L The handset will beep for 1 minute.
L To stop paging, press {LOCATOR/ INTERCOM}.
2 Handset:
Press {C}, {s}, or {INTERCOM} to answer the page.
3 Base unit:
When the paged party answers, speak into the MIC.
4 Base unit:
When finished talking, press {LOCATOR/INTERCOM}.
Note:
L You can locate a misplaced handset by paging it. (Handset locator)
29