Panasonic KX-TG5831AL, KX-TG5832AL Programming via direct commands, Direct commands chart

TG5831_5832AL.book Page 39 Monday, March 14, 2005 4:28 PM

Programmable Settings

Programming via direct commands

You can also programme most features using “direct commands”—special codes that take you directly to the feature you wish to programme and allow you to select the desired setting. There is no need to scroll through the unit’s menus.

Details of each feature can be found on the corresponding pages.

1

2

3

4

5

Press {MENU}.

Enter the desired feature code (shown below).

Enter the desired setting code (shown below).

L This step may vary depending on the feature being programmed.

Press {Save}.

Press {OFF} to exit programming mode.

Direct commands chart

Feature	Feature code	Setting code		Page
Ringer volume	{1} {1}	{1}: Low {2}: Medium		page 33
		{3}: High {0}: Off
Ringer tone	{1} {2}	{1}–{3}: Tone pattern 1–3		page 34
		{4}–{7}: Melody pattern 1–4
Interrupt tone	{1} {3}	{1}: On {2}: 2 times {0}: Off		page 34
Message play	{2}		–	page 44
Date and time	{4}	Go to step 3 on page 16.		page 16
Voice enhancer	{5}	{1}: On {0}: Off		page 35
Dial lock	{6}	Go to step 3 on page 37.		page 37
LCD contrast	{0} {1}	{1}–{6}: Level 1–6		page 35
Key tone	{0} {2}	{1}: On {0}: Off		page 37
Auto talk	{0} {3}	{1}: On {0}: Off		page 35
Set area code	{0} {4}	Go to step 4 on page 36.		page 36
Set dial mode	{0} {5} {1}		–	page 57
Set recall time	{0} {5} {2}	{1}: 700 ms {2}: 600 ms		page 36
		{3}: 400 ms {4}: 300 ms
		{5}: 250 ms {6}: 110 ms
		{7}: 100 ms {8}: 90 ms
Set line mode	{0} {5} {3}	{1}: A {2}: B		page 36
Ring count	{0} {6} {1}	{2}–{7}: 2–7 rings		page 48
		{0}: Toll saver
				39