Panasonic KX-TG5831AL, KX-TG5832AL operating instructions Answering system settings, Remote code

Press {MENU}.

TG5831_5832AL.book Page 47 Monday, March 14, 2005 4:28 PM

Answering System Features

*1 If pushed within the first 5 seconds of a message, the previous message will be played.

*2 To resume operation, enter a remote command within 15 seconds, or the voice guidance will start.

Turning on the answering system remotely

If the answering system is off, you can turn it on remotely.

1 Dial your phone number.

2 Let the phone ring 15 times.

L The unit will answer your call with the greeting message.

L You can hang up, or if you call from a touch tone phone, you can enter your remote code and begin remote operation (page 46).

Skipping the greeting message to leave a message

You can leave a message just as any outside caller can. Call your phone number, then press {*} to skip the greeting message and record your message after the beep.

Answering system settings

Remote code

A remote code must be entered when operating the answering system remotely. This code prevents unauthorised parties from listening to your messages remotely. Store any 2-digit number (00–99). The default setting is “11”.

1

2 Scroll to “Initial setting” by pressing {V} or {^}, then press {>}.

3 Scroll to “Set answering” by pressing {V} or {^}, then press {>}.

4 Scroll to “Remote code” by pressing {V} or {^}, then press {>}.

5 Select the desired remote code by entering a 2-digit number (00–99).

6 Press {Save}, then press {OFF}.

Note:

L To confirm the remote code, repeat steps 1 to 4. Press {OFF} when finished.

47