Panasonic KX-TCD735ALM operating instructions Before Requesting Help, Problem Remedy

Page 106

Before Requesting Help

Cordless Telephone
	Problem		Remedy

“ ” flashes and an alarm tone sounds			•You are too far from the base unit. Move closer and
when you press		.	try again.
			•Plug in the AC adaptor.

A busy tone sounds when you			•Another handset is in use.
press	.		•Base unit is in the talk mode.

“ ” flashes during a conversation and			•The handset is out of range. Move closer to the base
the call is disconnected.			unit and make the call again.

•Plug in the AC adaptor.

Static, sound cuts in/out, fades. Interference from other electrical units.

•Locate the handset and base unit away from other

electrical appliances (p. 5).

•Move closer to the base unit.

The handset does not ring.

•Turn the power ON (p. 15).

•The ringer is set to OFF. Select the desired volume level (p. 55).

The base unit does not ring.

•The ringer is set to OFF. Set to HIGH, MEDIUM or LOW (p. 70).

You cannot dial.	•The unit is in the call prohibition mode. Cancel the
	mode (p. 62).
	•The dialled number is restricted. Cancel the number
	(p. 74).
	•Key lock mode is set. Cancel the mode (p. 48).

You cannot redial.	•If the last number dialled was more than 24 digits
	long, the number will not be redialled.

You cannot program function items such as the handset ringer volume.

•Programming is not possible while the unit is in the

talk.

•Do not pause for over 60 seconds while programming.

You cannot store a name and phone number in the phonebook.

•You cannot store a name and phone number while

the unit is in the talk mode.

•Do not pause for over 60 seconds while storing.

106

Image 106

Contents Operating Instructions Charge the batteries for about 15 hours before initial useDear purchaser Instructions to customerReplace socket cover and tighten screw A. See Fig PQLV1AL power supply Service difficultiesRinger Equivalence Number REN For your future reference Optional accessoriesBefore Initial Use Included with this unitOperating range Base Unit LocationNoise Contents Programmable Functions On the Handset Contents Multi-Unit User Operations Useful Information Back side Location of ControlsHandset Recall Button ReceiverBase Unit Base Unit Display DisplayHandset Display IconsGetting Started Installing the Batteries in the HandsetConnections Recharge Handset display only Getting Started Battery ChargeBattery information Handset display onlyTo turn the power OFF With the Handset Turning the Power ON/OFFTo turn the power on Basic Start-up OperationsTerminating a Call Basic Start-up Operations With the Handset Making a CallAnswering a Call With the Base Unit Making a call Digital SpeakerphoneTo set the answering system on Basic Answering System OperationsPre-Recorded Greeting Message To set the answering system OFFTo Setting Base, then press Setting the Current TimeSetting the Current Date Date and TimeMaking Calls Redial CallDigital Speakerphone To make a hands-free phone conversationWith the Handset Auto Talk Storing a Dialled Number into the Handset PhonebookRedial Call Making Calls With the Base UnitCalling Back with the Caller List Auto Talk p Answering CallsTemporary Ringer/Monitor OFF Display BacklightAnswering Calls With the Base Unit Selecting the Receiver Volume 8 levels During ConversationPaging/Intercom Paging the Handset from the Base Unit Individual PagingWith the Handset Transferring a Call Using the Intercom Selecting the Ringer Type for PagingCaller ID Caller ID ServiceHow caller information is displayed when a call is received Checking the number of new callsWith the Handset Caller ListViewing the Caller List With the Base UnitWhat means When viewing long telephone numbersCaller List Base unit displayOr C With the Handset Editing the Caller’s Phone NumberWith the Base Unit Editing the Caller’s Phone Number Press to call backTo Clear, then press To clear a selected caller information in the caller listTo clear all caller information in the caller list To All Clear, then pressPress twice Press While Save Phonebook is at Arrow, pressKeypad, , or C Then pressEnter a phone number, up to 24 digits With the HandsetKeypad, , or C Then press While Save is at the arrow, pressCategory, then press With the Handset Private Category FeatureTo select the ringer type for the private category Press or to select the display backlight colourPhonebook Private Category TableTo change the character mode If you make a mistake while entering a nameGreek AÄÅ Extended C d e e l l l n n r r s s s t z z z Character TableExtended Russian Press While Save is at the arrow, press Clearing an Item in the Handset PhonebookKeypad, , or C p Press Press Press or until the arrow points To Clear, then pressMaking a Call with the Handset Phonebook With the Handset Finding an Item in the Handset PhonebookTo find a name by initial Press Or wait for 60 seconds Phonebook Audible Caller Ring FeatureHold C Press Counting as one digit pClearing an Item in the Base Unit Phonebook With the Handset Editing an Item in the Base Unit PhonebookRecording, press Making a Call with the Base Unit Phonebook Phonebook With the Handset Playback an Audible Caller RingFinding an Item in the Base Unit Phonebook Press or until the arrow points To Audible Call, then pressTo exit the phonebook, press C To make a call with hot key dial Phonebook With the Handset Hot Key DialTo store an item as hot key dial To clear a caller information in the hot key dialHandset 2 Sender Press To copy a selected item in the handset phonebookHandset 1 Receiver During an intercom call, press Phonebook is displayedPhonebook is copied Phonebook With the HandsetTo copy all items in the handset phonebook DisplayedFirst item in the handset phonebook is displayed Press INT thenCopy to Base is displayed To the item you desire to copy is Displayed, then pressKey Lock Pause FeatureTo cancel the key lock To set the key lockRecall Feature Call Waiting and Caller ID CompatibleTo select the base unit Access pSettings p To clear the handsetTo set the direct call mode ON/OFF p To select the display language pWith the Handset Changing the 4-digit Handset PIN To Setting Handset, then pressHandset PIN Enter the new 4-digit handset PIN TwiceWith the Handset Setting the Alarm Time Time AlarmSetting the Time Alarm OFF To stop the time alarm Ringer typeRinger Option With the Handset Selecting the Handset Ringer Volume/TypeTo select the handset ringer volume Press or to select the desired typeOFF Tone Option With the Handset Setting the Key Tone ON/OFFSetting the Call Waiting Tone ON/OFF Press or to select on or OFFTo Range Alarm, then press Setting the Battery Low Alarm ON/OFFFactory preset is OFF Factory preset is onWhile Standby Display is at Arrow, press With the Handset Selecting the Standby Mode DisplayDisplay Option Press or to select BaseOr Phone No., then press During a conversation, the display will be as followsSelecting the Display Backlight Colour Factory preset is greenWith the Handset Selecting the Display Language Language, then pressCall Option, then press To set the call prohibition mode ON/OFFWith the Handset Call Prohibition Enter the 4-digit handset PIN pTo set the direct call number To set the direct call modeWith the Handset Direct Call To dial the stored numberOther Option To Battery Type, then pressCurrent battery type is at the arrow Press or to select Ni-Cd or Ni-MH, then pressFunction Reset Handset SettingsFunction Initial setting Enter the 4-digit handset PIN pInput Command is displayed Direct command Summary of Programmable Function on the Base UnitWith the Handset Setting the 4-digit Base Unit PIN Base Unit PINWith the Handset Selecting the All Handsets Ringer Mode Ringer Mode SelectionSelecting the Selected Handsets Ringer Mode Press 2 then Current setting is displayed on 0 OFFKey Tones Press 1 for on Press 0 for OFFSelecting the Base Unit Ringer Type Selecting the Base Unit Ringer VolumeTo Setting Base, then press Press 2 TwiceOther Feature Beep sounds To return to the standby mode, pressOther Feature With the Handset Selecting the Pause Timing When you dial a restricted number With the Handset Setting the Call RestrictionCall Restriction To cancel the call restriction numbers To cancel the call restricted handsetsCall Restriction With the Handset Reset Base Unit Settings Press 0 , then enter the 4-digit base unit PIN pLights and voice guidance is heard from the speaker See corresponding pages for function detailsMsg * ········To erase one recorded message To record a greeting message p To playback a greeting message pTo record a memo message p To set the answering system on pGreeting Message To record your own greeting message with direct commandTo record your own greeting message with function menu To Play OGM, then press Press To playback your own greeting messageTo set the answering system Press INT then Press 8 to set ON, or press 0 to set OFFTo Play New Msg, then press Press To playback new recorded messagesTo playback all recorded messages During playback of a recorded message, press thenTo erase all recorded messages with function menu To erase all recorded messages with direct commandQuick Play New Message Press INT then Press thenAnswering System Operations with the Handset During Playback of a Recorded MessageContinue your conversation When finished, press then Recording Your Telephone Conversation Using the HandsetYou can record a telephone conversation Selecting the Number of Rings Each time you press or , the volume level will changeToll Saver When set to Auto Press Press keypad 0 , or 2 to 7 to set the number of ringsPress 1 , 2 or 3 to select the recording time Setting the Monitor Function ON/OFFSelecting the Caller’s Recording Time To set to ON, press To set to OFF, pressPress the following button for the operation you desire Setting the Unit to Answer CallsAnswering System Buttons on the base unit Press to set the answering system onRecording a Greeting/Memo Message Monitoring Incoming CallsPlayback Recorded Messages To playback the most recent message Answering System Operations with the Base UnitDuring Playback of a Recorded Message Unit erases the message Erasing Recorded MessagesTo erase one recorded message To erase all recorded messagesRemote Operation from a Touch Tone Phone Summary of remote operationBeep sounds To change the remote code, repeat from step Setting the Remote CodePress to set the remote operation OFF Enter a 3-digit numberRemote Operation from a Touch Tone Phone Voice Menu Skip During playback Direct Remote OperationRepeat During playback Stop During playbackOperating More than One Handset Optional Multi-Unit User OperationsOperating More than One Base Unit Handset Press RegistrationRegistering a Handset in the Base Unit Registration tone sounds HandsetSpecified base unit access Registration Selecting the Base Unit AccessAutomatic base unit access Auto To Select Base, then pressEnter the handset numbers you desire to cancel Cancelling a Handset Registration in the Base UnitCancelling a Base Unit To Cancel Base, then pressIntercom Intercom between HandsetsTo transfer a call without using the intercom To transfer a call using the intercomTransferring a Call from One Handset to Another Intercom Conference Battery Replacement Replace the batteries with new ones as shownUsing the Belt Clip To attach the belt clip To adjust the headset receiver volume HIGH, Medium or LOW Using the Optional Headset Connecting the headset to the handset While using the headset, press orWall Template To charge the handset batteryWall Mounting Connect the AC adaptorInstall the batteries and close the battery cover Option CoversProblem Remedy Before Requesting HelpDoes not function While using the intercom, two tones soundUnit does not display the caller’s phone numbers You cannot register the handset in the base unitAnswering System Problem Remedy Before Requesting HelpGeneral Remedy Problem For CustomersSafety Instructions 111 Adding Another Phone Telephone Line Cord Standard TelephoneTerm Definitions DectN52