Panasonic KX-TCD735ALM operating instructions Other Option, To Battery Type, then press

Page 64

Other Option

In “Other Option” menu, Changing the 4-digit handset PIN (p. 52), To set the auto talk feature ON/OFF (p. 21) are also available.

with the Handset Selecting the Battery Type

Two Nickel Metal-hydride (Ni-MH) batteries are included with this unit. Nickel Cadmium (Ni-Cd) rechargeable batteries can also be used. If you replace the batteries with Ni-Cd batteries, you must set the battery type selection to Ni-Cd”, or the battery strength will not be displayed correctly. The factory preset is Ni-MH”.

Make sure that the power is ON (p. 15), and the unit is in the standby mode.

1Press .

2Press or until the arrow points to “Setting Handset”, then press .

3Press or until the arrow points

to “Other Option”, then press .

4Press or until the arrow points

to “Battery Type”, then press .

The current battery type is at the arrow.

5Press or to select Ni-Cd or

Ni-MH”, then press .

The display will return to the “Battery

Type”. To return to the standby mode,

press or wait for 60 seconds.

Incorrect battery type selection may shorten battery life.

64

Image 64
Contents Operating Instructions Charge the batteries for about 15 hours before initial useDear purchaser Instructions to customerReplace socket cover and tighten screw A. See Fig PQLV1AL power supply Service difficultiesRinger Equivalence Number REN Optional accessories Before Initial UseFor your future reference Included with this unitOperating range Base Unit LocationNoise Contents Programmable Functions On the Handset Contents Multi-Unit User Operations Useful Information Location of Controls HandsetBack side Recall Button ReceiverBase Unit Display Handset DisplayBase Unit Display IconsGetting Started Installing the Batteries in the HandsetConnections Getting Started Battery Charge Battery informationRecharge Handset display only Handset display onlyWith the Handset Turning the Power ON/OFF To turn the power onTo turn the power OFF Basic Start-up OperationsBasic Start-up Operations With the Handset Making a Call Answering a CallTerminating a Call With the Base Unit Making a call Digital SpeakerphoneBasic Answering System Operations Pre-Recorded Greeting MessageTo set the answering system on To set the answering system OFFSetting the Current Time Setting the Current DateTo Setting Base, then press Date and TimeMaking Calls Redial CallDigital Speakerphone To make a hands-free phone conversationWith the Handset Auto Talk Storing a Dialled Number into the Handset PhonebookRedial Call Making Calls With the Base UnitCalling Back with the Caller List Answering Calls Temporary Ringer/Monitor OFFAuto Talk p Display BacklightSelecting the Receiver Volume 8 levels During Conversation Paging/IntercomAnswering Calls With the Base Unit Paging the Handset from the Base Unit Individual PagingWith the Handset Transferring a Call Using the Intercom Selecting the Ringer Type for PagingCaller ID Service How caller information is displayed when a call is receivedCaller ID Checking the number of new callsCaller List Viewing the Caller ListWith the Handset With the Base UnitWhen viewing long telephone numbers Caller ListWhat means Base unit displayWith the Handset Editing the Caller’s Phone Number With the Base Unit Editing the Caller’s Phone NumberOr C Press to call backTo clear a selected caller information in the caller list To clear all caller information in the caller listTo Clear, then press To All Clear, then pressPress While Save Phonebook is at Arrow, press Keypad, , or CPress twice Then pressWith the Handset Keypad, , or CEnter a phone number, up to 24 digits Then press While Save is at the arrow, pressWith the Handset Private Category Feature To select the ringer type for the private categoryCategory, then press Press or to select the display backlight colourPhonebook Private Category TableTo change the character mode If you make a mistake while entering a nameGreek AÄÅ Extended C d e e l l l n n r r s s s t z z z Character TableExtended Russian Clearing an Item in the Handset Phonebook Keypad, , or C p PressPress While Save is at the arrow, press Press Press or until the arrow points To Clear, then pressMaking a Call with the Handset Phonebook With the Handset Finding an Item in the Handset PhonebookTo find a name by initial Phonebook Audible Caller Ring Feature Hold C PressPress Or wait for 60 seconds Counting as one digit pClearing an Item in the Base Unit Phonebook With the Handset Editing an Item in the Base Unit PhonebookRecording, press Phonebook With the Handset Playback an Audible Caller Ring Finding an Item in the Base Unit PhonebookMaking a Call with the Base Unit Phonebook Press or until the arrow points To Audible Call, then pressTo exit the phonebook, press C Phonebook With the Handset Hot Key Dial To store an item as hot key dialTo make a call with hot key dial To clear a caller information in the hot key dialTo copy a selected item in the handset phonebook Handset 1 Receiver During an intercom call, pressHandset 2 Sender Press Phonebook is displayedPhonebook With the Handset To copy all items in the handset phonebookPhonebook is copied DisplayedPress INT then Copy to Base is displayedFirst item in the handset phonebook is displayed To the item you desire to copy is Displayed, then pressPause Feature To cancel the key lockKey Lock To set the key lockRecall Feature Call Waiting and Caller ID CompatibleAccess p Settings pTo select the base unit To clear the handsetTo set the direct call mode ON/OFF p To select the display language pTo Setting Handset, then press Handset PINWith the Handset Changing the 4-digit Handset PIN Enter the new 4-digit handset PIN TwiceWith the Handset Setting the Alarm Time Time AlarmSetting the Time Alarm OFF To stop the time alarm Ringer typeWith the Handset Selecting the Handset Ringer Volume/Type To select the handset ringer volumeRinger Option Press or to select the desired typeOFF With the Handset Setting the Key Tone ON/OFF Setting the Call Waiting Tone ON/OFFTone Option Press or to select on or OFFSetting the Battery Low Alarm ON/OFF Factory preset is OFFTo Range Alarm, then press Factory preset is onWith the Handset Selecting the Standby Mode Display Display OptionWhile Standby Display is at Arrow, press Press or to select BaseOr Phone No., then press During a conversation, the display will be as follows Factory preset is green With the Handset Selecting the Display Language Selecting the Display Backlight Colour Language, then pressTo set the call prohibition mode ON/OFF With the Handset Call ProhibitionCall Option, then press Enter the 4-digit handset PIN pTo set the direct call mode With the Handset Direct CallTo set the direct call number To dial the stored numberTo Battery Type, then press Current battery type is at the arrowOther Option Press or to select Ni-Cd or Ni-MH, then pressReset Handset Settings Function Initial settingFunction Enter the 4-digit handset PIN pInput Command is displayed Direct command Summary of Programmable Function on the Base UnitWith the Handset Setting the 4-digit Base Unit PIN Base Unit PINWith the Handset Selecting the All Handsets Ringer Mode Ringer Mode SelectionSelecting the Selected Handsets Ringer Mode Current setting is displayed on 0 OFF Key TonesPress 2 then Press 1 for on Press 0 for OFFSelecting the Base Unit Ringer Volume To Setting Base, then pressSelecting the Base Unit Ringer Type Press 2 TwiceOther Feature Beep sounds To return to the standby mode, pressOther Feature With the Handset Selecting the Pause Timing When you dial a restricted number With the Handset Setting the Call RestrictionCall Restriction To cancel the call restriction numbers To cancel the call restricted handsetsCall Restriction With the Handset Reset Base Unit Settings Press 0 , then enter the 4-digit base unit PIN pLights and voice guidance is heard from the speaker See corresponding pages for function detailsMsg * ········To erase one recorded message To playback a greeting message p To record a memo message pTo record a greeting message p To set the answering system on pGreeting Message To record your own greeting message with direct commandTo record your own greeting message with function menu To playback your own greeting message To set the answering systemTo Play OGM, then press Press Press INT then Press 8 to set ON, or press 0 to set OFFTo playback new recorded messages To playback all recorded messagesTo Play New Msg, then press Press During playback of a recorded message, press thenTo erase all recorded messages with direct command Quick Play New MessageTo erase all recorded messages with function menu Press INT then Press thenAnswering System Operations with the Handset During Playback of a Recorded MessageContinue your conversation When finished, press then Recording Your Telephone Conversation Using the HandsetYou can record a telephone conversation Each time you press or , the volume level will change Toll Saver When set to AutoSelecting the Number of Rings Press Press keypad 0 , or 2 to 7 to set the number of ringsSetting the Monitor Function ON/OFF Selecting the Caller’s Recording TimePress 1 , 2 or 3 to select the recording time To set to ON, press To set to OFF, pressSetting the Unit to Answer Calls Answering System Buttons on the base unitPress the following button for the operation you desire Press to set the answering system onRecording a Greeting/Memo Message Monitoring Incoming CallsPlayback Recorded Messages To playback the most recent message Answering System Operations with the Base UnitDuring Playback of a Recorded Message Erasing Recorded Messages To erase one recorded messageUnit erases the message To erase all recorded messagesRemote Operation from a Touch Tone Phone Summary of remote operationSetting the Remote Code Press to set the remote operation OFFBeep sounds To change the remote code, repeat from step Enter a 3-digit numberRemote Operation from a Touch Tone Phone Voice Menu Direct Remote Operation Repeat During playbackSkip During playback Stop During playbackOperating More than One Handset Optional Multi-Unit User OperationsOperating More than One Base Unit Registration Registering a Handset in the Base UnitHandset Press Registration tone sounds HandsetRegistration Selecting the Base Unit Access Automatic base unit access AutoSpecified base unit access To Select Base, then pressCancelling a Handset Registration in the Base Unit Cancelling a Base UnitEnter the handset numbers you desire to cancel To Cancel Base, then pressIntercom Intercom between HandsetsTo transfer a call without using the intercom To transfer a call using the intercomTransferring a Call from One Handset to Another Intercom Conference Battery Replacement Replace the batteries with new ones as shownUsing the Belt Clip To attach the belt clipUsing the Optional Headset Connecting the headset to the handsetTo adjust the headset receiver volume HIGH, Medium or LOW While using the headset, press orTo charge the handset battery Wall MountingWall Template Connect the AC adaptorInstall the batteries and close the battery cover Option CoversProblem Remedy Before Requesting HelpWhile using the intercom, two tones sound Unit does not display the caller’s phone numbersDoes not function You cannot register the handset in the base unitAnswering System Problem Remedy Before Requesting HelpGeneral Remedy Problem For CustomersSafety Instructions 111 Adding Another Phone Telephone Line Cord Standard TelephoneTerm Definitions DectN52