Panasonic KX-TCD735ALM operating instructions With the Handset Setting the Call Restriction

Call Restriction

You can restrict desired handset(s) and base unit from dialling selected phone numbers. Phone numbers beginning with the restricted digits cannot be dialled out. For example, if “00” is assigned as the call restriction number, international calls cannot be made.

For selected handset(s) and base unit, you can assign up to 6 call restriction numbers (up to 8 digits). The factory preset is OFF.

with the Handset

Setting the Call Restriction

Make sure that the power is ON (p. 15), and the unit is in the standby mode.

1 Press			.			Ex. Handset number 5 is selected.
2 Press			or	until the arrow points			Input Command
							12 6	0123456
to “Setting Base”, then press					.
•“Input Command” is displayed.
						5 Press			.
3 Press		6 , then enter the 4-digit base
						6 Enter a call restriction number, up to
unit PIN (p. 67).
•All registered handset number(s) and base						8 digits.
						•Pressing			C erases the digit to the left of
	unit number “0” are displayed.
•The handset number(s) and base unit							the cursor. To erase all digits, press and
	number “0” flash if the call restriction						hold	C .
	number(s) is/are already set.					7 Press			.
Ex. 1 base unit and 6 handsets are						•A beep sounds.
	registered.
						•If you desire to set another call restriction,
	Input			Command			follow steps 6 to 7. If you finish, go to step 8.
	12 6	0123456				8 Press			.
						•The display will return to “Setting
4 Enter the handset number(s) which you							Base”. To return to the standby mode,
							press		.
desire to restrict.						•You can exit the programming mode any time
•The selected handset number(s) flash(es).
						by pressing			.
•If you misdial, press the number(s) again.

When you dial a restricted number

The call is restricted, and the dialled number flashes.

Ex. The restricted number is “00”.

00

Chapter 4 Programmable Functions on the Base Unit

73