Panasonic KX-TCD735ALM To change the character mode, If you make a mistake while entering a name

with the Handset Selecting Characters

The keypad can be used to enter letters and character symbols. The letters are printed on the keypad. Pressing each button selects a character as shown on page 36 and 37.

To change the character mode

You can select one of 6 character modes by pressing during entering a name procedure. The factory preset is “ABC”.

1 Press			while entering a name.					<Enter Name>
2 Press		or	until the arrow points
to the desired character mode, then press				.
•The character mode is displayed.							HABC
								0—9
								ΑΒΓ
	ABC: Alphabet (Capital/lower*)							: Russian
			0–9: Numeric			: Extended 2 (Capital/lower*)
			ΑΒΓ : Greek		AÄÅ: Extended 1 (Capital/lower*)

*To change between capital to lower case, press . Each time you press , the mode will change.

For example, to enter “Anne”:

1. Press	2	then .			A
2. Press		then	6	TWICE.	An
3. Press		then	6	TWICE.	Ann
4. Press	3	TWICE.			Anne

If you make a mistake while entering a name

Press or to move the cursor to the right of incorrect character, press C to delete, and enter the correct character. Pressing C erases the character to the left of the cursor. To erase all characters, press and hold C .

Chapter 2 Cordless Telephone

35