Linksys PAP2-NA manual Connect the Ethernet Network Cable

Page 10

Phone Adapter with 2 Ports for Voice-over-IP

3.Connect the included Ethernet network cable to the ETHERNET port of the Phone Adapter. Connect the other end to the one of the Ethernet ports on your router or gateway.

4.Connect the included power adapter to the POWER port on the back panel of the Phone Adapter. Connect the other end to a standard electrical outlet.

5.The Power, Ethernet, and Phone LEDs will be solidly lit when the Phone Adapter is ready for use.

6.Follow the instructions provided by your Internet phone service provider.

If you need to manually configure the Phone Adapter’s network settings, you can use the telephone; for instructions, proceed to “Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu.”

The installation of the Phone Adapter is complete. Now you can pick up your phone and make calls. NOTE: Dial 1 + area code + phone number for all calls, including local ones.

Proceed to the next section, “Placement Options,” if you want to attach the Phone Adapter’s base.

Chapter 3: Connecting the Phone Adapter

Figure 3-3: Connect the Ethernet Network Cable

Figure 3-4: Connect the Power

6

Instructions for Connecting the Phone Adapter

Image 10
Contents Phone Adapter How to Use this Guide Copyright and TrademarksTable of Contents Back Panel Front PanelWelcome IntroductionWhat’s in this Guide? Introduction What’s in this Guide? Getting to Know the Phone Adapter Back Panel PortsFront Panel LEDs Overview Connecting the Phone AdapterInstructions for Connecting the Phone Adapter Router Phone AdapterConnect the Ethernet Network Cable Wall-Mount Option Placement OptionsStand Option Remove the plate from the Phone Adapter’s bottom panelAccessing the Interactive Voice Response Menu Using the Phone Adapter’s Interactive Voice Response MenuUsing the Interactive Voice Response Menu Has been enabled or disabled. If Interactive Voice Response Menu121 Enter the network 7932 Enter 1 to enable This feature is protected by a Entering a Password Configuring the Settings for Your Internet Phone ServiceAppendix a Troubleshooting Common Problems and SolutionsIP address Phone Adapter Internet phone 53 to Application Start and End Protocol IP Address EnableInternet phone 5060 to IP address Phone Adapter Internet phone 69 toIP address Phone Adapter Internet phone 69 to IP address Phone Adapter Internet phone 69 to Frequently Asked Questions Ethernet LED does not light upShared Resources Appendix B Windows HelpNetwork Neighborhood/My Network Places Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications Storage Humidity Storage TempOperating Humidity 10~90% Non-CondensingAppendix E Warranty Information Limited WarrantyAppendix F Regulatory Information FCC StatementAppendix G Contact Information Linksys
Related manuals
Manual 33 pages 13.67 Kb