Linksys PAP2-NA manual Introduction, Welcome, What’s in this Guide?

Page 5

Phone Adapter with 2 Ports for Voice-over-IP

Chapter 1: Introduction

Welcome

Thank you for choosing the Linksys Phone Adapter with 2 Ports for Voice-over-IP. This Phone Adapter will allow you to make phone or fax calls using the your broadband connection.

How does the Phone Adapter do this? Plug the Phone Adapter into your network router or gateway, and then connect your phones or fax machines to the Phone Adapter. Each of the Phone Adapter’s two telephone jacks operates independently, with separate phone service and phone numbers, so you can have up to two Internet phone lines—telephone service delivered through your cable or DSL Internet connection.

But what does all of this mean? Networks are useful tools for sharing Internet access and computer resources. With the Phone Adapter, your phones or fax machines can share your high-speed Internet connection and take advantage of it. You will be able to make phone calls using the account you set up with your Internet phone service provider, even while you’re surfing the Internet. So, networks not only are useful in homes and offices, but also can be fun.

Use the instructions in the Quick Installation or this User Guide to help you connect the Phone Adapter after you have set up an account with your Internet phone service provider. These instructions should be all you need to get the most out of the Phone Adapter.

NOTE: For information about your Internet phone service, refer to the materials provided by your

Internet phone service provider.

What’s in this Guide?

This user guide covers the steps for installing the Phone Adapter.

Chapter 1: Introduction

This chapter describes the Phone Adapter’s applications and this User Guide.

Chapter 2: Getting to Know the Phone Adapter

This chapter describes the physical features of the Phone Adapter.

Chapter 1: Introduction

1

Welcome

Image 5
Contents Phone Adapter Copyright and Trademarks How to Use this GuideTable of Contents Front Panel Back PanelWhat’s in this Guide? IntroductionWelcome Introduction What’s in this Guide? Back Panel Ports Getting to Know the Phone AdapterFront Panel LEDs Instructions for Connecting the Phone Adapter Connecting the Phone AdapterOverview Router Phone AdapterConnect the Ethernet Network Cable Stand Option Placement OptionsWall-Mount Option Remove the plate from the Phone Adapter’s bottom panelUsing the Interactive Voice Response Menu Using the Phone Adapter’s Interactive Voice Response MenuAccessing the Interactive Voice Response Menu Interactive Voice Response Menu Has been enabled or disabled. If121 Enter the network 7932 Enter 1 to enable This feature is protected by a Configuring the Settings for Your Internet Phone Service Entering a PasswordCommon Problems and Solutions Appendix a TroubleshootingInternet phone 5060 to Application Start and End Protocol IP Address EnableIP address Phone Adapter Internet phone 53 to IP address Phone Adapter Internet phone 69 toIP address Phone Adapter Internet phone 69 to IP address Phone Adapter Internet phone 69 to Ethernet LED does not light up Frequently Asked QuestionsNetwork Neighborhood/My Network Places Appendix B Windows HelpShared Resources Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications Operating Humidity Storage TempStorage Humidity 10~90% Non-CondensingLimited Warranty Appendix E Warranty InformationFCC Statement Appendix F Regulatory InformationLinksys Appendix G Contact Information
Related manuals
Manual 33 pages 13.67 Kb