Linksys PAP2-NA manual IP address Phone Adapter Internet phone 69 to

Page 21

Phone Adapter with 2 Ports for Voice-over-IP

Set up port forwarding on your router. You must specify that four port ranges be forwarded to the IP address of the Phone Adapter. These four port ranges are as follows: 5060-5061 (UDP), 53-53 (UDP), 69-69 (UDP), and 10000-20000 (UDP).

Before you set up port forwarding on your router, change two of the Phone Adapter’s settings using its Interactive Voice Response Menu. First, disable its DHCP feature, and then assign a static IP address to the Phone Adapter. Refer to “Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu” for instructions.

If you have a non-Linksys router, refer to its documentation for instructions. If you have a Linksys router, then follow these instructions:

1.On one of your networked computers, open your web browser.

2.Access the Router’s Web-based Utility by going to http://192.168.1.1 or the IP address of the Router.

3.A login screen will appear. Leave the User Name field blank. Enter the Router’s password (the default is admin) in the Password field. Then click the OK button.

4.Click the Applications & Gaming tab, and then click the Port Range Forwarding tab.

5.For each port range you must specify, enter a different name in the Application field. Then enter the number or range of external port(s) used by the Phone Adapter.

6.Select the protocol you will be using, UDP.

7.Enter the IP address of the Phone Adapter. For example, if the Phone Adapter’s IP address is 192.168.1.100, you would enter 100 in the field provided.

8.Repeat steps 5-7 until you have entered all four port ranges for the Phone Adapter.

Application

Start and End

Protocol

IP Address

Enable

 

 

 

 

 

Internet phone 1

5060 to 5061

UDP

(IP address of

X

 

 

 

Phone Adapter)

 

 

 

 

 

 

Internet phone 2

53 to 53

UDP

(IP address of

X

 

 

 

Phone Adapter)

 

 

 

 

 

 

Internet phone 3

69 to 69

UDP

(IP address of

X

 

 

 

Phone Adapter)

 

 

 

 

 

 

Internet phone 4

10000 to 20000

UDP

(IP address of

X

 

 

 

Phone Adapter)

 

 

 

 

 

 

9.Check the Enable option for the port services you want to use.

10.When you have completed the configuration, click the Save Settings button.

Appendix A: Troubleshooting

17

Common Problems and Solutions

Image 21
Contents Phone Adapter Copyright and Trademarks How to Use this GuideTable of Contents Front Panel Back PanelIntroduction WelcomeWhat’s in this Guide? Introduction What’s in this Guide? Back Panel Ports Getting to Know the Phone AdapterFront Panel LEDs Instructions for Connecting the Phone Adapter Connecting the Phone AdapterOverview Router Phone AdapterConnect the Ethernet Network Cable Stand Option Placement OptionsWall-Mount Option Remove the plate from the Phone Adapter’s bottom panelUsing the Phone Adapter’s Interactive Voice Response Menu Accessing the Interactive Voice Response MenuUsing the Interactive Voice Response Menu Interactive Voice Response Menu Has been enabled or disabled. If121 Enter the network 7932 Enter 1 to enable This feature is protected by a Configuring the Settings for Your Internet Phone Service Entering a PasswordCommon Problems and Solutions Appendix a TroubleshootingInternet phone 5060 to Application Start and End Protocol IP Address EnableIP address Phone Adapter Internet phone 53 to IP address Phone Adapter Internet phone 69 toIP address Phone Adapter Internet phone 69 to IP address Phone Adapter Internet phone 69 to Ethernet LED does not light up Frequently Asked QuestionsAppendix B Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications Operating Humidity Storage TempStorage Humidity 10~90% Non-CondensingLimited Warranty Appendix E Warranty InformationFCC Statement Appendix F Regulatory InformationLinksys Appendix G Contact Information
Related manuals
Manual 33 pages 13.67 Kb