Linksys PAP2-NA manual Getting to Know the Phone Adapter, Back Panel Ports

Page 7

Phone Adapter with 2 Ports for Voice-over-IP

Chapter 2: Getting to Know the Phone Adapter

Back Panel Ports

The Phone Adapter’s ports are located on the back panel.

 

Figure 2-1: Back Panel

PHONE 1 Port

For your primary Internet phone line, the PHONE 1 port allows you to connect your telephone

 

to the Phone Adapter using an RJ-11 telephone cable (not included).

PHONE 2 Port

If you have a second Internet phone service account, then use the PHONE 2 port. It allows you

 

to connect a second telephone (or fax machine) to the Phone Adapter using an RJ-11

 

telephone cable (not included).

NOTE: These Phone ports do not carry any voltage.

ETHERNET Port

The ETHERNET port allows you to connect the Phone Adapter to your router or gateway using

 

a Category 5 (or better) Ethernet network cable.

POWER Port

The POWER port is where you will connect the included power adapter.

Chapter 2: Getting to Know the Phone Adapter

3

Back Panel Ports

Image 7
Contents Phone Adapter Copyright and Trademarks How to Use this GuideTable of Contents Front Panel Back PanelWelcome IntroductionWhat’s in this Guide? Introduction What’s in this Guide? Back Panel Ports Getting to Know the Phone AdapterFront Panel LEDs Router Phone Adapter Connecting the Phone AdapterInstructions for Connecting the Phone Adapter OverviewConnect the Ethernet Network Cable Remove the plate from the Phone Adapter’s bottom panel Placement OptionsStand Option Wall-Mount OptionAccessing the Interactive Voice Response Menu Using the Phone Adapter’s Interactive Voice Response MenuUsing the Interactive Voice Response Menu Interactive Voice Response Menu Has been enabled or disabled. If121 Enter the network 7932 Enter 1 to enable This feature is protected by a Configuring the Settings for Your Internet Phone Service Entering a PasswordCommon Problems and Solutions Appendix a TroubleshootingIP address Phone Adapter Internet phone 69 to Application Start and End Protocol IP Address EnableInternet phone 5060 to IP address Phone Adapter Internet phone 53 toIP address Phone Adapter Internet phone 69 to IP address Phone Adapter Internet phone 69 to Ethernet LED does not light up Frequently Asked QuestionsShared Resources Appendix B Windows HelpNetwork Neighborhood/My Network Places Appendix C Glossary Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Phone Adapter with 2 Ports for Voice-over-IP Appendix D Specifications 10~90% Non-Condensing Storage TempOperating Humidity Storage HumidityLimited Warranty Appendix E Warranty InformationFCC Statement Appendix F Regulatory InformationLinksys Appendix G Contact Information
Related manuals
Manual 33 pages 13.67 Kb