Linksys PAP2-NA manual Enter the network

Phone Adapter with 2 Ports for Voice-over-IP

Interactive Voice Response Menu

Action	Command	Choices	Description
	(press these
	keys on the
	telephone)
Set Static IP Address	111	Enter the IP address	To set a static IP address, the DHCP
		using numbers on the	feature must be disabled. If the DHCP
		telephone keypad. Use	feature is enabled, then you will hear,
		the * (star) key when	“Invalid Option,” if you try to set a
		entering a decimal	static IP address.
		point.
Check Network Mask	120		You will hear the current network
(or Subnet Mask)			mask of the Phone Adapter.
Set Network Mask (or	121	Enter the network	To set the network mask, the DHCP
Subnet Mask)		mask using numbers	feature must be disabled. If the DHCP
		on the telephone	feature is enabled, then you will hear,
		keypad. Use the *	“Invalid Option,” if you try to set the
		(star) key when	network mask.
		entering a decimal
		point.
Check Static Gateway	130		You will hear the current gateway IP
IP Address			address of the Phone Adapter.
Set Static Gateway IP	131	Enter the IP address	To set a static gateway IP address, the
Address		using numbers on the	DHCP feature must be disabled. If the
		telephone keypad. Use	DHCP feature is enabled, then you will
		the * (star) key when	hear, “Invalid Option,” if you try to set
		entering a decimal	a static gateway IP address.
		point.
Check MAC Address	140		You will hear the MAC address of the
			Phone Adapter in hexadecimal string
			format.
Check Firmware	150		You will hear the version number of
Version			the firmware currently installed on the
			Phone Adapter.
Chapter 4: Using the Phone Adapter’s Interactive Voice Response Menu				10

Using the Interactive Voice Response Menu