Dynaflex LCR, LCD manual Coupling Requirements

DYNAFLEX ELASTOMERIC FLEXIBLE COUPLINGS Page 122 of 124

			COUPLING REQUIREMENTS
Primary Function
Shaft Misalignment					Specifi c Requirements
__________________Axial					_______________Inches
__________________Angular					_______________Degrees
__________________Parallel					_______________Inches
__________________Torsional Vibration Isolation					_______________% Isolation @ _________RPM
__________________Torsional Shock Loads					_______________Maximum Amplitude
__________________Noise Attenuation
Parameters
* System Operating Temperature:			Normal _______ °F		Maximum _______ °F		Minimum _______ °F
* Environment: Oil Immersion _______________________					Oil Splash ________________________________________
Other ______________________________					Mil Spec _________________________________________
* Space Envelope:	Maximum Length ________________				Maximum Diameter________________________________
* Attachments: Driving		Spline		Flange	Driven	Spline	Flange
		Keyways		Set Screws		Keyways	Set Screws
* Shaft Diameters:	Driving_____________			Driven___________________
Fail-Safe Feature Required:		Yes	No
Maximum Allowable Weight:___________________________
* Minimum Hours Life Required: _______________________

Please attach the following:

1.A layout of the available space envelope and other pertinent drawings showing connecting driv- eline components.

2.A system mass-elastic diagram including all rotational mass moments of inertia and torsional stiffnesses.

Remarks ______________________________________________________________________________________________

* Required data

Please return to: LORD Corporation

2000 West Grandview Blvd. P.O. Box 10038

Erie, PA 16514-0038

Fax: 814 866 1773

A part’s listing in this catalog does not guarantee its availability.
To download/print the most current catalog, go to www.lordfulfi llment.com/upload/PC7000.pdf.	Rev.1 10/08