Automatic installation

Install

Install Start

Manual installation

Install Selection mode

System Programme Search Fine tune Store

Store TV channels

You can now search for and store the TV channels in two different ways: using Automatic Installation or Manual Installation (tuning-in channel by channel).

Select your choice with the cursor right.

After the new or extra TV channels have been stored, the TV automatically transfers those TV channels to the video recorder if it is equipped with the EasyLink function. The message EasyLink: downloading ...... appears on the screen. The programme list

of the video recorder is now the same as the one of the TV.

Automatic installation

&Select Automatic installation in the Install menu.

Note: All channels must be unlocked in order to autoprogram. If requested, enter your PIN code to unlock all channels. (See TV, Features menu, Childlock, p. 18.)

éPress the cursor down.

The autoprogramming option label Start appears.

Press the cursor right.

The message Searching appears and the progress of autoprogramming is displayed.

When the Automatic installation is complete, the puck navigates to Install again.

If a cable system or a TV channel which broadcasts ACI (Automatic Channel Installation) or a TV channel transmitting a teletext page with the frequencies and programme names of all the TV channels which can be received, is detected, the search is stopped and the programme list appears.

The programme list is automatically filled with all the programme numbers and names of the TV channels transmitted.

It is possible that the cable company or the TV channel displays a broadcast selection menu. Layout and items are defined by the cable company or the TV channel. Make your choice with the cursor and press the OK key.

Manual installation

Searching for and storing TV channels is done channel by channel. You must go through every step of the Manual Installation menu.

&Select Manual installation in the Install menu.

éPress the cursor down.

Follow the instructions on screen.

Note: Search or direct selection of a TV channel

If you know the frequency, the C- or S-channel number, enter the 3 digits of the frequency directly with the digit keys 0 to 9 (e.g. 048). Press the cursor down to proceed.

Repeat to search for another TV channel.

6Installation

Page 7
Image 7
Philips FTR9964/69S manual Store TV channels, Automatic installation, Manual installation