General

Setup

Programme title Yes / No

General

Setup

Teletext level 2.5 On / Off

General

Setup

Set/Change code

General

Setup

Centre mode

Yes / No

Programme title

&Select Programme title with the cursor down.

éPress the cursor right to select Programme title Yes or No.

When selected Yes, after the selection of a TV programme or after pressing the i key on the remote control, a TV channel which broadcasts teletext may transmit the name of the TV channel or the programme title.

When selected No, the programme title will only appear after pressing the i key, and not after the selection of a TV channel.

Teletext level 2.5

Some broadcasters offer the opportunity to see more colours, other background colours and nicer pictures in the teletext pages.

&Select Teletext level 2.5 with the cursor down.

éPress the cursor right to select Teletext level 2.5 On to take advantage of this feature.

Press the cursor right again to select Teletext level 2.5 Off if you like the more neutral teletext layout.

The selection made is valid for all channels which broadcast teletext.

Note: It may take a few seconds before teletext broadcast switches over to Teletext level 2.5.

Set/Change code

The Child lock feature (see TV, Features, p. 18) allows you to lock channels to prevent children from watching certain programmes.

To watch locked channels, you need to enter an access code.

The Set/Change code menu item allows you to create or change a Personal Identification Number (PIN).

&Select Set/Change code with the cursor down.

éIf no code exists yet, the menu item is set to Set code. Follow the instructions on screen.

If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen.

All number combinations from 0000 to 9999 are valid numbers.

The General menu reappears with a message confirming that the code has been created.

Important:You have forgotten your code !

&Select Set/Change code in the General menu.

éPress OK.

Press the cursor right.

Enter the overriding code 8-8-8-8.

(Press the cursor again and enter a new personal 4-digit code. The previous code is erased and the new code is stored.

Centre mode

When you have connected a multi channel audio receiver to the receiver box

(see Connect peripheral equipment, p. 30) and you have selected Centre mode Yes, the loudspeakers of the monitor will act as centre speaker, making a separate centre speaker unnecessary.

10Installation

Page 11
Image 11
Philips FTR9964/69S Programme title, Teletext level, Set/Change code, ImportantYou have forgotten your code, Centre mode