Source
Setup
EXT1
EXT2
EXT3
EXT4
EXT5
Front
Source
This menu allows you to select the peripheral you connected to one of the external inputs.
&Select Source with the cursor right.
éPress the cursor down to select one of the external inputs.
“Press the cursor right to enter the list of types of peripherals attached to the selected input.
‘Select the peripheral device with the cursor up/down.
Once you have selected the source, e.g.VCR, this source will automatically be selected when your remote control is in VCR mode, see p. 12, and you press the w key on the remote control.
Decoder
If a decoder or a descrambler is connected, see p. 28, you can define one or more programme numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme with the cursor down.
“Select the programme number under which you have stored the programme coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None, EXT1, EXT2.
•Select None if you do not want the selected programme number being activated as a decoder programme number.
