Do not switch programme numbers or do not switch off your TV when you are recording !
Record with your video recorder with EasyLink
If you have connected an S-VHS video recorder provided with the EasyLink function, you can record S-VHS quality from an S-VHS peripheral connected to the front side of the receiver. (E.g. from an S-VHS camcorder.)
In TV mode, it is possible to start a direct recording of the programme which is being displayed on the TV screen.
& Press the INSTANT ® record key, under the door of the remote control of the TV or of the video recorder or the record key on the video recorder.
The video recorder switches on from standby and a message of what is being recorded appears on the screen.
The video recorder starts recording the programme you are watching.
Select the correct external on your video recorder.
Switch on the equipment.
&
é
“ Set your video recorder to record.
You record what you are watching on the screen.
EXTERNAL 1, EXTERNAL 3, EXTERNAL 4, EXTERNAL 5 the receiver
EXTERNAL 2
Record a programme on your video recorder connected to from Audio/Video equipment connected to
or to sockets on
Record with your video recorder without EasyLink
To record S-VHS quality, connect an S-VHS peripheral directly to the video recorder.
Record a TV programme
& Select the programme number on your video recorder.
é Set your video recorder to record.
See the handbook for your video recorder.
Switching programme numbers on your TV does not disturb recording !
w 
| | | | B |
| TV | VCR | DVD | SAT |
‡ | TUNER | CD | TAPE | CDR |
b | | S | Ì |
| ® | Ò | ‡ π | † |
| æ | | | b |
| OK | | | MENU |
Ï
V ¬ P
1 2 3
4 5 6
7 8 9
◊
i 0 0
é Press the ‡ key to stop the recording. |
Do not switch programme numbers or do not switch off your receiver when you are |
recording ! |
When recording a programme from a peripheral connected to EXTERNAL 1, 3, 4, 5 or |
FRONT, you can not select another TV programme on the screen. |
To watch TV programmes again, press the programme number you want to select |
twice. |
Attention: the recording is stopped and your video recorder switches to standby. |
If you switch to standby during recording of a programme from a peripheral |
connected to EXTERNAL 1, 3, 4, 5 or FRONT, the blinking lamp on the front of your |
receiver indicates that you are still recording. The blinking stops after the recording is |
finished. |
Attention: |
Recording from EXTERNAL 5 will only have black and white pictures. |
