Uniden UH073sx manual Roger Beep, Selecting Channel

Page 11

ROGER BEEP

Roger Beep is a BEEP that is sent to notify the end of transmission (both PTT and VOX transmission.) Roger Beep can be heard through the speaker when Key Beep is on. Roger Beep is transmitted even if key beep is turned off.

However Roger Beep will not be heard from the speaker.

To turn OFF Roger Beep: Press and hold while turning on the radio.

To turn ON Roger Beep: Press and hold while turning on the radio.

SELECTING CHANNEL

Press

or

to select the desired channel.

 

 

If you press and hold the

or

,

 

channel number will scroll rapidly.

 

9

Image 11
Contents Operating Guide Waterproof JIS7 Contents Introduction FeaturesIncluded in Your Package Optional AccessoriesMounting the Drop-in Charger Getting StartedAttaching the Battery Pack Do not transmit when the uh073sx is in the drop-in charger Charging the Battery PackBattery Level Display Dup while turning on the radio OperationSelecting Channel Roger BeepSquelch To Transmit and Receive Using a Repeater Channel Example CH40 becomes active ScanningGroup Scan GS Mode Choosing a Priority Channel DROP-OUT DelayPriority Channel Programming Scan ChannelsCtcss Scan Operation Advanced FeaturesProgramming Ctcss Code To De-activate VOX To activate VOXKeypad Lock Power SaveBack Lighting To use monitor Busy Channel LOCK-OUT BCLMonitor UHF Channel & Frequencies Ctcss Codes & Frequencies Uniden UH073SX UHF CB Transceiver Radio WarrantyControls & Indicators LCD Display