Uniden UH073sx manual To Transmit and Receive

Page 13

TO TRANSMIT AND RECEIVE

The uh073sx uses the 40 UHF-CB Channels. For your reference a list of the available channels and corresponding frequencies is printed at the end of this manual.

1. The maximum RF transmit power of uh073sx is 3 Watts.

To switch to low power, press 1/3w . LOW appears on the LCD.

To switch back to higher power, press 1/3w again. LOW indicator disappears from the LCD.

2. Before you transmit, listen for activity on the selected channel.

3.When the channel is clear, press and hold the PTT to transmit. TX appears on the LCD.

Hold the radio with microphone approximately five cms in front of your mouth with the antenna at approximately 45* angle away from your head. Speak in a clear, normal conversational voice.

4. When you have finished speaking, release the PTT and listen for a response. TX indicator

then disappears on the LCD.

The display shows BUSY when a transmission is being received by your radio.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Operating Guide Waterproof JIS7 Contents Introduction FeaturesIncluded in Your Package Optional AccessoriesMounting the Drop-in Charger Getting StartedAttaching the Battery Pack Do not transmit when the uh073sx is in the drop-in charger Charging the Battery PackBattery Level Display Dup while turning on the radio OperationSelecting Channel Roger BeepSquelch To Transmit and Receive Using a Repeater Channel Example CH40 becomes active ScanningGroup Scan GS Mode Priority Channel DROP-OUT DelayProgramming Scan Channels Choosing a Priority ChannelProgramming Ctcss Code Advanced FeaturesCtcss Scan Operation To De-activate VOX To activate VOXBack Lighting Power SaveKeypad Lock Monitor Busy Channel LOCK-OUT BCLTo use monitor UHF Channel & Frequencies Ctcss Codes & Frequencies Uniden UH073SX UHF CB Transceiver Radio WarrantyControls & Indicators LCD Display
Top Page Image Contents