Uniden UH073sx manual Charging the Battery Pack

Page 8

4. To take the beltclip off the radio, turn it

and slid it up.

Charging the Battery Pack

Your radio is powered by a specially designed Lithium Ion battery pack.

!Before operating the uh073sx, charge the Lithium Ion battery pack for 5 hours without interruption in the drop-in charger.

1. Place the uh073sx in the drop-in charger.

2. The red LED illuminates and stays ON, until fully charged.

!The charger won’t overcharge the battery pack. When charging is completed, the charge LED is no longer illuminated.

!Do not transmit when the uh073sx is in the drop-in charger!

!You can monitor incoming calls while the uh073sx is in the drop-in charger.

6

Image 8

Contents Operating Guide Waterproof JIS7 Contents Features IntroductionOptional Accessories Included in Your PackageGetting Started Mounting the Drop-in ChargerAttaching the Battery Pack Charging the Battery Pack Do not transmit when the uh073sx is in the drop-in chargerBattery Level Display Operation Dup while turning on the radioRoger Beep Selecting ChannelSquelch To Transmit and Receive Using a Repeater Channel Scanning Example CH40 becomes activeGroup Scan GS Mode DROP-OUT Delay Priority ChannelProgramming Scan Channels Choosing a Priority ChannelCtcss Scan Operation Advanced FeaturesProgramming Ctcss Code To activate VOX To De-activate VOXKeypad Lock Power SaveBack Lighting To use monitor Busy Channel LOCK-OUT BCLMonitor UHF Channel & Frequencies Ctcss Codes & Frequencies Warranty Uniden UH073SX UHF CB Transceiver RadioControls & Indicators LCD Display