Uniden UH073sx manual Busy Channel LOCK-OUT BCL, Monitor, To use monitor

Page 21

BUSY CHANNEL LOCK-OUT (BCL)

This feature prevents accidental transmission on a busy channel. This is recommended on channels where CTCSS is being used. If the channel is "active" and the signal is coming from a non or different CTCSS code user the BCL feature will prevent you from transmitting.

To activate BCL

bcl

 

Press and hold

for 1.5 secs. until "BCL" appears on display.

To De-activate BCL

 

Press and hold

bcl

for 1.5 secs. until "BCL" disappears from the display.

MONITOR

This feature enables users to listen in for weak signals on the current channel at the press of a button.

To use monitor

!

!

!

!

For brief listening, press mon .

For continuous listening. Press and hold mon for 2 sec. A two tone beep will be heard and the receiver circuit will stay open letting in both the noise & weak signals.

Display shows MON and BUSY icons.

To return to normal receive mode press mon .

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Operating Guide Waterproof JIS7 Contents Introduction FeaturesIncluded in Your Package Optional AccessoriesMounting the Drop-in Charger Getting StartedAttaching the Battery Pack Do not transmit when the uh073sx is in the drop-in charger Charging the Battery PackBattery Level Display Dup while turning on the radio OperationSelecting Channel Roger BeepSquelch To Transmit and Receive Using a Repeater Channel Example CH40 becomes active ScanningGroup Scan GS Mode Priority Channel DROP-OUT DelayProgramming Scan Channels Choosing a Priority ChannelAdvanced Features Programming Ctcss CodeCtcss Scan Operation To De-activate VOX To activate VOXPower Save Back LightingKeypad Lock Busy Channel LOCK-OUT BCL MonitorTo use monitor UHF Channel & Frequencies Ctcss Codes & Frequencies Uniden UH073SX UHF CB Transceiver Radio WarrantyControls & Indicators LCD Display
Top Page Image Contents