Uniden UH073sx manual Battery Level Display

Page 9

Battery Level Display

The BATTERY icon in the top right hand corner of the screen indicates the uh073sx current battery voltage level at all times. The battery level is displayed in 4 levels.

LEVEL 4

Battery 100% full

LEVEL 3

Battery approx. 40% capacity

LEVEL 2

Low Battery

LEVEL 1 (flashing)

Empty Battery

When PTT is pressed at Level Empty, battery icon and channel number will flash, transmission is disabled.

Recharge the battery at any time. From empty the battery will take up to 5 hours to fully charge.

Battery Life : 12 Hours (Typical)

This is based on the following Duty Cycle:

Transmit (Low Power)

5%

Receive5%

Stand-by90%

7

Image 9

Contents Operating Guide Waterproof JIS7 Contents Introduction FeaturesIncluded in Your Package Optional AccessoriesMounting the Drop-in Charger Getting StartedAttaching the Battery Pack Do not transmit when the uh073sx is in the drop-in charger Charging the Battery PackBattery Level Display Dup while turning on the radio OperationSelecting Channel Roger BeepSquelch To Transmit and Receive Using a Repeater Channel Example CH40 becomes active ScanningGroup Scan GS Mode Priority Channel DROP-OUT DelayProgramming Scan Channels Choosing a Priority ChannelAdvanced Features Programming Ctcss CodeCtcss Scan Operation To De-activate VOX To activate VOXPower Save Back LightingKeypad Lock Busy Channel LOCK-OUT BCL MonitorTo use monitor UHF Channel & Frequencies Ctcss Codes & Frequencies Uniden UH073SX UHF CB Transceiver Radio WarrantyControls & Indicators LCD Display