Uniden UH073sx manual Getting Started, Mounting the Drop-in Charger

Page 6

GETTING STARTED

Mounting the Drop-in Charger

1.Mount the drop-in charger to either a table or wall.

Table:

Attach the drop-in charger using the mounting screws and washers.

Wall:

Insert the two mounting screws into the wall keeping the same space as the holes on the charger.

Place the charger with the screws through the larger holes then turn the charger.

2.Plug one end of the AC adapter into the wall outlet and the other end into the drop-in charger.

When you mount the drop-in charger in a mobile vehicle, use the optional cigarette lead instead.

Attaching the Antenna

Attach the antenna to the uh073sx.

Be sure the antenna is firmly seated.

4

Image 6

Contents Operating Guide Waterproof JIS7 Contents Features IntroductionOptional Accessories Included in Your PackageGetting Started Mounting the Drop-in ChargerAttaching the Battery Pack Charging the Battery Pack Do not transmit when the uh073sx is in the drop-in chargerBattery Level Display Operation Dup while turning on the radioRoger Beep Selecting ChannelSquelch To Transmit and Receive Using a Repeater Channel Scanning Example CH40 becomes activeGroup Scan GS Mode Programming Scan Channels DROP-OUT DelayPriority Channel Choosing a Priority ChannelAdvanced Features Programming Ctcss CodeCtcss Scan Operation To activate VOX To De-activate VOXPower Save Back LightingKeypad Lock Busy Channel LOCK-OUT BCL MonitorTo use monitor UHF Channel & Frequencies Ctcss Codes & Frequencies Warranty Uniden UH073SX UHF CB Transceiver RadioControls & Indicators LCD Display