Remote (PC Control) Mode
To connect Scanner to PC:
Plug the scanner end of the RS232C straight interface cable into the remote port on the rear of your scanner.
Plug the other end of the cable
To program your scanner:
You can program and control your scanner remotely from a PC using third party software. After connecting the scanner to a PC, turn the radio on.
To use the Remote (PC Control) mode, you must purchase third party software and use as directed. Make sure that your scanner is connected to the serial port of the PC using the RS232C straight cable.
Start Remote Mode:
Press E key for 2 seconds. REMOTE mode is selected. To distinguish from Normal operation mode, “RMT” icon appears.
A unique feature of the BC780XLT is that all the front panel keys as well as the VFO on the radio remain operational in remote mode.
For information on purchasing third party software to program and control your BC 780XLT, see the flyer included in the box with this radio. You can also go to www.bc780XLT.com on the Internet or call
PC Control Parameter
For your information:
Transfer speed : 2400/4800/9600/19200 bps (adjustable)
Start/Stop | : 1 bit, 1 bit |
Data Length | : 8 bit |
Parity bit | : None |
Code | : ASCII code |
Flow Control | : None |
Return Code | : Carriage Return only |
65