Uniden BC780XLT manual Additional Features, Dimmer, Enter Lock, Key Beep Option, Screen Mask

Page 76

Additional Features

The following additional features are designed for you to customize your scanner. Once these features have been turned on or off, they will remain as they are set until you reset them, even if you turn the scanner off and then on again.

Dimmer

To change brightness of the display:

1.Press MENU.

2.Press E to select SYSTEM DATA.

3.Press E to select DIMMER.

4.Select one from High-Medium-Offusing ▲ or ▼ and then press E.

Enter Lock

You can lockout the keypad to prevent any accidental entry. To activate this feature:

1.Press MENU.

2.Press E to select SYSTEM DATA.

3.Press ▼ to select ENTER LOCK then press E.

4.Set to ON using ▲ or ▼ and then press E.

The icon appears on the display when locked.

Key Beep Option

To choose beep sound on or off:

1.Press MENU.

2.Press E to select SYSTEM DATA.

3.Press ▼ to select KEY BEEP and then press E.

4.Set to ON or OFF using ▲ or ▼ and then press E.

Screen Mask

The trunk, frequency, receiving mode, and signal meter indications on the display are masked when this feature is activated. (except while in Search mode) This feature reduces the amount of displayed information.

1.Press MENU.

2.Press E to select SYSTEM DATA.

3.Press ▼ to select SCREEN MASK and then press E.

4.Set to ON or OFF using ▲ or ▼ and then press E.

5.To quickly turn off the screen mask, press the VFO/SELECT control.

68

Page 75 Page 77
Image 76
Page 75 Page 77
Contents BC780XLT Introduction Front View and Display Rear View Page Page Contents Inside back cover Important Notice What is Scanning? What is Searching?What is Trunk Tracking? TerminologyPage Feature Highlights Where to Obtain More Information Information on the InternetIncluded with Your Scanner Setup Connecting an AntennaMounting an Antenna Optional AntennaTypical Mounting Methods Mounting the Scanner in Your VehicleApplying Power for Vehicle Installation Applying Power Using Standard AC Power Desktop InstallationConnecting an External Speaker Connecting an Earphone Connecting the Clone CableConnecting the Tape Recorder Listening SafelyBasic Operation Setting the SquelchTurn the Scanner On Understanding the Menu System Menu Description and Numeric Keypad Equivalents 2SCREEN Mask10BANK TAG 6STEPS 7I-CALLMOTOROLA and Edcs 0CONTROL CH only Motorola 800 & 900 Systems 3ATTENUATOR Programming Storing Frequencies into ChannelsDuplicate Frequency Alert Storing Text TagsAssigning a Bank Tag to a Bank Assigning a Text Tag to a ChannelBeep Alert Programming TipsDeleting a Stored Frequency Assigning the beep alert to a channelTo directly access a specific channel ScanningRF Attenuation Feature Setting the Delay ModeLockout in Scanning Mode Lockout in Manual ModeChannel Lockout Restoring All Locked-out Channels Restoring a Locked-out ChannelPriority Scan Changing the Priority Channel Setting a Search Range SearchingData Skip Search Hold FeatureFrequency Skip Storing Search Frequencies Auto StoringSquelch SQ Mode Additional Menu Options for Searching Service Search Service Search SkipWeather Channel Search Testing the Alert SirenNWR-SAME Alert Programming Fips Code Trunked Systems Programming and Receiving Trunked Systems Programming Trunking FrequenciesSelecting Trunking Programming Menu Mode Selecting Trunking System TypeReceiving Trunked Systems Trunked SearchID Hold and Direct Entry ID Hold Mode ID LockoutChannel Activity Indicators Restoring Locked-out IDsTo unlock a single ID, follow these steps To unlock all locked out IDs in a bank at onceProgramming ID Scan Lists Manually Scan ListsTo enter a Type I ID To enter an Edacs ID Program ID Manually with the Menu ModeTo enter a LTR ID ID Scan Mode Setting Priority in Trunking Mode Programming Scan Lists During SearchDeleting a Stored ID Moving between Scan List MemoriesCall Motorola/EDACS Motorola TypeCalls in Scan and Manual Mode Multi-TrackScan & Search Icons Edacs Reception Edacs TrackingAn EDACSTrunked system Special Edacs Features AFS Partial Entry FeatureLTR Reception LTR TrackingMotorola Reception Motorola TrackingFleet Map Programming Selecting Preset Fleet MapProgramming a Fleet Map Programming a Hybrid System Toggling the Status Bit Control Channel Only Mode Disconnect Tone Detect Option End Code Remote Interface SmartScan ModeTo connect Scanner to PC To connect Scanner to External Modem To perform the SmartScan DownloadPage Bank Lock Menu for SmartScanTransfer Speed Flow Control Smart Scanner TipsDial Type Page Remote PC Control Mode Start Remote ModeTo program your scanner PC Control ParameterChange Transfer Speed Clone ModeTo connect the scanner to scanner Complete displays Additional Features DimmerEnter Lock Key Beep OptionReverse Mode Receiving Mode SelectionFrequency and Channel Tuning with the VFO Control Mute On/OffCare and Maintenance Troubleshooting Page Specifications Glossary of Terms Glossary of termsPage Page Preset Fleet Maps AppendixS11 S12 User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code RestrictionsNWR-SAME Event Code Reverse List Ctcss Frequency List Hz DCS Tone Code Memo Memo Memo Page Page Page Page One Year Limited Warranty Uniden America CorporationCovered under one or more of the following U.S. patents

BC780XLT specifications

The Uniden BC780XLT is a versatile and popular scanner that has made a name for itself among scanning enthusiasts and professionals alike. Released in the early 2000s, this model is known for its extensive feature set, allowing users to monitor a wide range of frequencies and communications.

One of the primary features of the BC780XLT is its capability to scan multiple frequency bands, including VHF, UHF, and 700/800 MHz frequencies. This makes it an ideal choice for monitoring public safety communications, utility services, and various other two-way radio frequencies. The scanner operates in an impressive frequency range of 25 MHz to 1.3 GHz, allowing users to enjoy a broad spectrum of signals.

The BC780XLT features TrunkTracker technology, which enables it to follow trunked radio systems. This is crucial for monitoring communications from agencies that operate on these complex frequency systems, like police and fire departments. The scanner can decode both Motorola and EDACS trunked systems, providing extensive coverage of public safety communications.

User-friendly controls and advanced features make the BC780XLT accessible for both beginners and experienced users. The numeric keypad allows for quick entry of frequencies, while the large LCD display provides easy visibility of channel information, including frequency and mode. The 10-channel pre-programmed memory allows users to store their favorite frequencies and easily scan between them.

In addition to its scanning capabilities, the BC780XLT also supports close call technology. This feature allows the scanner to automatically detect nearby signals, instantly alerting users to any active frequencies in their vicinity. This is particularly useful for users in urban areas, where multiple frequencies may be in use simultaneously.

The BC780XLT also has a robust battery-saving feature, making it an excellent option for those who need to scan on the go. This functionality, coupled with its ability to operate on AC or DC power, adds to its versatility, ensuring uninterrupted scanning during extended use or in field operations.

In conclusion, the Uniden BC780XLT Scanner stands out for its comprehensive feature set, including TrunkTracker technology, extensive frequency coverage, and user-friendly design. Whether for hobbyists, emergency responders, or professionals needing reliable communication, the BC780XLT continues to be a valuable tool in the world of scanning. Its enduring popularity speaks to its performance and adaptability in a rapidly evolving technological landscape.
Top Page Image Contents