Cobra Electronics CXR725 owner manual Channel Scan

Page 11

Operation

Mode Button

Mode Functions

To de-program a memory location:

1. Press the Mode button until the Memory icon

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Channel Scan

•

Your microTALK radio can automatically scan channels.

 

Memory Icon

Channel Buttons

and the memory location

flash on the display.

2. Press the Channel Up or Channel Down button

to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

Mode Button

Scanning Channels

To scan channels:

1.Press the Mode button until the Scan icon and the channel numbers flash on the display.

2.Press the Channel Up or Channel Down button to begin scanning channels.

The radio ignores specific privacy

Lock/Enter Button

3.

Press the Lock/Enter button. The channel

 

numbers will flash on the display.

4.

Press the Channel Up or Channel Down button

 

to select Channel 0.

5.

Choose one of the following:

 

a. Press the Lock/Enter button to enter the

Channel Buttons

codes while scanning channels.

The Scan icon will continue to be displayed

when scan is on. Your radio will continue to scan all channels and stop if an incoming transmission is detected. Your radio will remain on that channel for 10 seconds.

Channel 0

channel/privacy code in the selected memory

location and return to the beginning of memory

location options.

b. Press the Mode button to enter the

channel/privacy code in the selected memory

location and proceed to other functions on the

channel/privacy code displayed before you

entered mode functions.

While setting channel scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel or channel/privacy code displayed before you entered mode functions.

While de-programming a memory location, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

16

Nothing Comes Close to a Cobra® 17

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Questions Making Life Easier and SaferRadio while on the go Automated Help DeskAcknowledgement Product FeaturesWarranty and Trademark FeaturesEstimated operation time on full charge 10 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioTurning on Your microTALK Radio Using Your RadioTo Illuminate Display Selectable HighLow Power OutputChannels Listening for a ResponseMicroTALK Range Signal Strength MeterAuto Squelch/Maximum Range Speaker/Microphone/Charge JackPrivacy Codes Mode FunctionsScrolling through Mode Functions Will be displayed in the following orderSet DCS Privacy Codes To select a DCS privacy code Set Ctcss Privacy Codes To select a Ctcss privacy codeAfter selecting a channel, press Memory Locations Voice Activated Transmit VOXTo next Memory location, which will blink Entered mode functionsPress the Mode button to enter the channel/privacy To recall a stored memory channel locationChannel Scan To scan privacy codes Return to Standby modeIf you press the Talk button while scanning, but more than Memory Location Scan Current setting Press the Mode button to proceed to other functionsTo change call settings Press the Mode buttonUnique call alert Keystroke Tones Mode Functions and General SpecificationsCall Tone Settings Time you press a button or change a settingNormal Position General Specifications FCC LicenseSafety Information for microTALK Radios For Products Purchased Outside the U.S.A Product ServiceSend the entire product For Products Purchased in the U.S.A
Top Page Image Contents