Cobra Electronics CXR725 Mode Functions and General Specifications, Call Tone Settings

Page 15

Operation

Mode Functions and General Specifications

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

10 Call Tone Settings

You can choose from 10 different call tone settings to transmit

 

a unique call alert.

 

Keystroke Tones

With Keystroke Tones turned on, your radio will sound beeps each

 

time you press a button or change a setting.

 

Mode Button

Call Tone Setting

Channel Buttons

To change a call tone setting:

1.Press the Mode button until the

letter “C” and the current call tone number (01 through 10) is displayed.

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

Mode Button

To change keystroke tones:

 

1. Press the Mode button until the Keystroke

 

Tones icon flashes on the display. The

 

current on or off setting is displayed.

Keystroke Tones On

2. Press the Channel Up or Channel Down

 

button to turn keystroke tones on or off.

 

3. Choose one of the following:

 

a. Press the Mode button to enter the new

Channel Buttons

setting and return to Standby mode.

b. Press the Lock/Enter button to enter the new

 

 

setting and return to Standby mode.

Roger Beep Confirmation Tone

Roger Beep is an audible tone that your listener will hear when you

 

release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode Button

To turn roger beep on or off:

1. Press the Mode button until the

 

Roger Beep icon flashes on the display.

 

The current on or off setting is displayed.

Roger Beep On

2. Press the Channel Up or Channel Down button

 

to select roger beep on or off.

 

3. Choose one of the following:

 

a. Press the Mode button to enter

 

the new setting and proceed to other

Channel Buttons

functions.

 

b. Press the Lock/Enter button to enter the new

 

setting and return to Standby mode.

24

Nothing Comes Close to a Cobra® 25

Image 15 Cobra Electronics CXR725 Mode Functions and General Specifications, Call Tone Settings, Unique call alert Keystroke Tones
Contents Questions Making Life Easier and SaferRadio while on the go Automated Help DeskAcknowledgement Product FeaturesWarranty and Trademark FeaturesEstimated operation time on full charge 10 hours Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioTurning on Your microTALK Radio Using Your RadioTo Illuminate Display Selectable HighLow Power OutputChannels Listening for a ResponseMicroTALK Range Signal Strength MeterAuto Squelch/Maximum Range Speaker/Microphone/Charge JackPrivacy Codes Mode FunctionsScrolling through Mode Functions Will be displayed in the following orderSet Ctcss Privacy Codes To select a Ctcss privacy code After selecting a channel, pressSet DCS Privacy Codes To select a DCS privacy code Memory Locations Voice Activated Transmit VOXTo next Memory location, which will blink Entered mode functionsPress the Mode button to enter the channel/privacy To recall a stored memory channel locationChannel Scan Return to Standby mode If you press the Talk button while scanning, but more thanTo scan privacy codes Memory Location Scan Current setting Press the Mode button to proceed to other functionsTo change call settings Press the Mode buttonUnique call alert Keystroke Tones Mode Functions and General SpecificationsCall Tone Settings Time you press a button or change a settingGeneral Specifications FCC License Safety Information for microTALK RadiosNormal Position For Products Purchased Outside the U.S.A Product ServiceSend the entire product For Products Purchased in the U.S.A