Cobra Electronics CXR725 owner manual Auto Squelch/Maximum Range, Speaker/Microphone/Charge Jack

Page 6
Lock Feature

Operation

Using Your Radio

 

 

 

Auto Squelch/Maximum Range

Your microTALK radio is equipped with Auto Squelch, which

 

automatically shuts off weak transmissions and unwanted noise

 

due to terrain and conditions. This slightly reduces the Maximum

 

Range at which signals can be heard.

 

You can turn off auto squelch to allow all signals to be

 

received and extend the maximum range of your radio.

 

Light/Max Range

To briefly turn off auto squelch:

 

– Press the Light/Max Range button

 

 

 

 

for less than five seconds.

 

 

If you hear two beeps, you have turned

 

 

the maximum range extender on (see below).

 

 

To turn maximum range extender on:

 

Introduction

Operation

Customer Assistance Warranty

 

Speaker/Microphone/Charge Jack

Your microTALK radio can be fitted with an external Speaker/Microphone,

 

freeing your hands for other tasks. This same jack also serves as the

 

connecting point for the wall charger/adapter.

 

Speaker/Microphone/

To attach a speaker/microphone:

 

Charge Jack

1. Open the speaker/microphone/charge

 

 

tab on top of your microTALK radio.

 

2. Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

– Press and hold the Light/Max Range button for at

least five seconds until you hear

two beeps which indicates the maximum range

extender is on.

To turn maximum range extender off:

– Press and release the Light/Max Range

button or change channels.

The Lock feature locks the Channel, Mode, Hi•Lo and Power buttonsto prevent accidental operation.

Signal Strength

Maximum Range

Signal Strength Meter

Your microTALK radio has a Signal Strength

 

Meter that shows the strength of your incoming

 

and outgoing transmissions. The ascending bars

 

next to the signal strength indicate the strength of

 

the signal. The greater the number of bars visible,

 

the stronger the signal. The fewer number of bars

 

visible, the weaker the signal.

 

microTALK Range

Your range will vary depending on

 

terrain and conditions.

 

Lock/Enter Button

Lock Mode

To turn the lock feature on or off:

Press and hold the Lock/Enter button for two seconds.

A double beep sound is used to confirm your lock on or off request. When in Lock mode,

the Lock icon will be displayed.

Reduced Range

Reduced Range

In flat, open country your radio will

operate at maximum range.

Buildings and foliage in the path of the

signal can reduce the range of the radio.

Dense foliage and hilly terrain will

further reduce the range of the radio.

On FRS channels 8 through 14, your radio

automatically switches to low power, which

will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.

6

Nothing Comes Close to a Cobra® 7

Image 6
Contents Automated Help Desk Making Life Easier and SaferRadio while on the go QuestionsFeatures Product FeaturesWarranty and Trademark AcknowledgementCaring for Your microTALK Radio Avoid exposure to extreme temperaturesReplace battery compartment cover and belt clip Estimated operation time on full charge 10 hoursUsing Your Radio Turning on Your microTALK RadioListening for a Response Selectable HighLow Power OutputChannels To Illuminate DisplaySpeaker/Microphone/Charge Jack Signal Strength MeterAuto Squelch/Maximum Range MicroTALK RangeWill be displayed in the following order Mode FunctionsScrolling through Mode Functions Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy code After selecting a channel, pressSet DCS Privacy Codes To select a DCS privacy code Voice Activated Transmit VOX Memory LocationsTo recall a stored memory channel location Entered mode functionsPress the Mode button to enter the channel/privacy To next Memory location, which will blinkChannel Scan Return to Standby mode If you press the Talk button while scanning, but more thanTo scan privacy codes Memory Location Scan Press the Mode button Press the Mode button to proceed to other functionsTo change call settings Current settingTime you press a button or change a setting Mode Functions and General SpecificationsCall Tone Settings Unique call alert Keystroke TonesGeneral Specifications FCC License Safety Information for microTALK RadiosNormal Position For Products Purchased in the U.S.A Product ServiceSend the entire product For Products Purchased Outside the U.S.A