Cobra Electronics CXR725 owner manual Set Ctcss Privacy Codes To select a Ctcss privacy code

Page 8

Operation

Mode Functions

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

Set CTCSS Privacy Codes

•

 

To select a CTCSS privacy code:

Mode Button

 

1. After selecting a channel, press the

 

 

 

Mode button until the CTCSS icon appears and the small numbers flash on the display (01 through 38).

CTCSS Privacy Code

NOTE

If DCS is turned on at the channel selected, the display will flash the

CTCSS icon and “OFF.” To switch from

Channel Buttons

DCS to CTCSS, press the Channel Up

 

or Channel Down button while the display

is flashing “OFF.” The display will then show the small numbers flashing and you will then be able to proceed to step 2.

2.Press using the Channel Up or Channel Down button to select a CTCSS privacy code. You can hold the Up or Down button for fast advance.

3.When your desired CTCSS privacy code is displayed, choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

Set DCS Privacy Codes

•

 

To select a DCS privacy code:

Mode Button

 

 

 

1. After selecting a channel, press the Mode button until the DCS icon appears and the small numbers flash on the display

(01 through 104).

DCS Privacy Code

NOTE

If CTCSS is turned on at the channel selected, the display will flash the

DCS icon and “OFF.” To switch from

Channel Buttons

CTCSS to DCS, press the Channel Up

or Channel Down button while the display

is flashing “OFF.” The display

will then show the small numbers flashing and you will then be able

to proceed to step 2.

2.Press using the Channel Up or Channel Down button to select a DCS privacy code. You can hold the Up or Down button for fast advance.

3.When your desired DCS privacy code is displayed, choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.

10

Nothing Comes Close to a Cobra® 11

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Making Life Easier and Safer Radio while on the goAutomated Help Desk QuestionsProduct Features Warranty and TrademarkFeatures AcknowledgementAvoid exposure to extreme temperatures Replace battery compartment cover and belt clipCaring for Your microTALK Radio Estimated operation time on full charge 10 hoursUsing Your Radio Turning on Your microTALK RadioSelectable HighLow Power Output ChannelsListening for a Response To Illuminate DisplaySignal Strength Meter Auto Squelch/Maximum RangeSpeaker/Microphone/Charge Jack MicroTALK RangeMode Functions Scrolling through Mode FunctionsWill be displayed in the following order Privacy CodesSet DCS Privacy Codes To select a DCS privacy code Set Ctcss Privacy Codes To select a Ctcss privacy codeAfter selecting a channel, press Voice Activated Transmit VOX Memory LocationsEntered mode functions Press the Mode button to enter the channel/privacyTo recall a stored memory channel location To next Memory location, which will blinkChannel Scan To scan privacy codes Return to Standby modeIf you press the Talk button while scanning, but more than Memory Location Scan Press the Mode button to proceed to other functions To change call settingsPress the Mode button Current settingMode Functions and General Specifications Call Tone SettingsTime you press a button or change a setting Unique call alert Keystroke TonesNormal Position General Specifications FCC LicenseSafety Information for microTALK Radios Product Service Send the entire productFor Products Purchased in the U.S.A For Products Purchased Outside the U.S.A
Top Page Image Contents