Uniden manual Direct Wall Mounting DCT7565 Only

Direct Wall Mounting (DCT7565 Only)

If you don’t have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting loca- tion that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 5-feet of a working phone jack to avoid excessive wire lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws with a minimum length of 1-3/8 inches, with anchor- ing devices suitable for the wall material where the base unit will be placed.

1.Insert two mounting screws into the wall, using the appropriate anchor- ing device, 3-15/16 inches apart. Allow about 1/8 inch between the wall and screw heads for mounting the phone.

2.Refer to the steps on page 14 to complete the mounting process.

15