Uniden DCT7565 Transferring a Call, Answering a Transferred Call, Press int’com/xfer or speaker

Transferring a Call

You can transfer a call from one station to another.

	From the base - DCT7565 only		From the handset
1.	During a call, press [int’com/xfer].	1.	During a call, press [xfer/intercom].
2.	The call is automatically placed on hold.	2.	Use [ ] or [ ] to select the station you want to trans-
	Select the handset you want to talk with		fer the call to, then press		. The call will
	by pressing [1] to [4]. To page all the reg-		be automatically be placed on hold, and a paging tone
	istered handsets, press [*/tone/<]. A pag-		sounds. To cancel the transfer, press [ /flash] or [			].
	ing tone sounds. To cancel the transfer,	3.	When another station accepts the transferred call, you
	press [int’com/xfer] or [speaker].		will be disconnected. if you want to rejoin the call,
3.	When another station accepts the trans-		press [ /flash] or [	] again.
	ferred call, you will be disconnected. If
	you want to rejoin the call, press
	[speaker] again.

Answering a Transferred Call

When a station receives a call transfer, it sounds a paging tone and shows the ID of the station that is paging. To accept the call transfer:

1.Press [ /flash] or [xfer/intercom] from the handset or [int’com/xfer] or [speaker] on the DCT7565 base.

2.To speak to the caller, press [/flash] on the receiving handset or [speaker] on the DCT7565 base.

3.Only the first station to answer the transfer page will be connected to the call. If the transfer page is not picked up within one minute, the operation will be canceled.

40