Uniden DCT7565 Using Hold, Conference, and Transfer, Placing a Call on Hold, Conferencing

Using Hold, Conference, and Transfer

Placing a Call on Hold

1.During a call, press [xfer/intercom] on the handset (or [hold] on the DCT7565 base) to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read LINE ON HOLD.

2. To return to the party on hold, press [ /flash] or [ ] on a handset or [speaker] on the DCT7565 base. The phone returns to the holding party.

Notes:

•You can only place a caller on hold for 5 minutes. Once 5 minutes has passed, that party’s line is disconnect- ed and the phone returns to standby.

•While a call is on hold, Caller ID and Call Waiting can not be used.

Conferencing

If you have more than one handset, up to three people can participate in a conference call on the DCT756 and up to four people on the DCT7565. A three-way conference call consists of an outside line and two handsets. A four-way conference call consists of one outside line, two handsets, and the base speakerphone. You can easily join a call al- ready in progress.

1.Press [/flash] or [ ] on the handset or [speaker] on the DCT7565 base to join the call.

2.To hang up, return the handset to the cradle or press [ ] on the handset. From the base, press [speaker]. The other station will still be connected to the call.

39