Uniden manual Connecting the Base and Charging the Handset, DCT756 DCT7565

Connecting the Base and Charging the Handset

1.Connect the AC adapter to the DC IN 9V jack.

2.Connect the AC adapter to a wall outlet that is not controlled by a switch.

3.Place the handset in the base with the LCD screen facing forward.

4.Make sure that the charge LED illuminates. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the base charging contacts.

5.Charge your handset at least 15-20 hours before plugging into the phone line.

Note: Use only the supplied AD-800 AC adapter with your phone. Do not use any other AC adapter.

DCT756 DCT7565

17