Uniden DCT756 Making an Intercom, Making a DirectLink Call, Exiting DirectLink Operation, Xfer

Making a DirectLink Call

1.To call another handset with DirectLink communication, press [ /flash]. The display shows TO DIRECTLINK A HANDSET PRESS [1-4].

2.Press the number of the handset you want to call. If the handset is out of range or not using DirectLink com- munication, the display shows UNAVAILABLE. To answer a DirectLink call, press [ /flash] or if Any Key An- swer is on, press any key of the twelve-key pad.

3.To exit the DirectLink call, press [ ].

Exiting DirectLink Operation

To exit DirectLink communication and return to normal standby, press [menu/clear] and then press or return the handset to the cradle. DIRECT LINK MODE CANCEL appears in the display.

Making an Intercom Page

You can use the intercom to talk to another station without using the phone line.

	From the base - DCT7565 only		From the handset
1.	With the phone in standby, press [int’com/	1.	With the phone in standy, press [xfer/intercom].
	xfer].	2.	Use [ ] or [ ] to select the station you want to
2.	Select the handset you want to talk with by		talk with, then press		. If you select
	pressing [1] to [4]. To page all registered		ALL, all other stations will	be paged.
	handsets, press [*/tone/<]. A paging tone	3.	To cancel the intercom page, press [			].
	sounds.

3.To cancel the intercom page, press [int’com/ xfer].

Notes: Intercom paging will be cancelled if any of the following things occur:

• You receive an outside call or an intercom page while selecting the other handset.

• You do not select a handset within 30 seconds.

• The party does not answer the page within one minute.

• The party is busy.

• The party is out of range (UNAVAILABLE appears on the display). 43