Uniden DCT7565 manual On the base or charging cradle

Symptom		Suggestion
Can’t make or receive calls.	•	Make sure you are not too far from the base.
	•	Make sure the line is not in use. If an outside call is already using a line,
		you cannot use that line to make another outside call.
	•	Check both ends of the base telephone line cord.
	• Make sure the AC adapter is plugged into the base and wall outlet.
	• Disconnect the AC adapter and reconnect.
	•	Change the Digital Security Code (see page 49).
The handset doesn’t ring or	•	Make sure that you are not too far from the base.
receive a page.	•	Charge the battery in the handset for 15 to 20 hours by placing the handset
	•	on the base or charging cradle.
		Change the Digital Security Code (see page 49).
Severe noise interference.	•	Keep the handset away from microwave ovens, computers, remote control
		toys, wireless microphones, alarm systems, intercoms, room monitors, flu-
	•	orescent lights, and electrical appliances.
		Move to another location or turn off the source of interference.
The Caller ID does not dis-	•	The call was placed through a switchboard.
play.	•	Call your telephone provider to verify your Caller ID service is corrent.
		There may be a problem with your Caller ID service.
You cannot register the hand-	•	Charge the battery pack in the handset for at least
set at the base.	•	15 to 20 hours.
		Change the Digital Security Code (see page 49).
The handset doesn’t commu-	•	Change the Digital Security Code (see page 49).
nicate with other handsets.	•	Make sure you have registered all handsets.
An extra handset can’t join	•	Make sure there are not 2 handsets already using the conference feature.
the conversation.	•	Make sure that another handset is not in privacy mode.
		50