Uniden DCT7585, DCT7085 manual Resetting Handsets, Registering DCX750 Handsets

Registering DCX750 Handsets

To register DCX750 handsets, simply place the accessory handset in the base. While the handset is registering, HANDSET REGISTERING will appear in the LCD. When REGISTRATION COMPLETE is displayed, the handset has been registered to the base. If REGISTRATION FAILED appears, remove the handset from the base and try again.

Registering DCX640 or DCX700 Handsets

1.On the base, press and hold [flash] until the CHARGE LED starts to blink.

2.On the handset, press and hold [#/→] until you hear a beep.

3.While the handset is registering, HANDSET REGISTERING appears in the display. When the display shows REGISTRATION COMPLETE, the handset has been registered to the base. If REGISTRATION FAILED appears, please try these steps again.

Resetting Handsets

If you want to register the handset to a different base or replace a handset with another one, you must first clear the registration information from the base and the handset.

1.Press and hold [ ] and [#/>] for at least 5 seconds, until the SYSTEM RESET menu appears.

2.Select the DEREGISTER HS submenu. WHICH HANDSET? appears in the display.

3.	Use [ ] and [ ] to select the handset ID you want to de-register, and then press [select/ ] .
	DEREGISTER HS appears.
4.	When the phone asks you to confirm, move the cursor to select YES, and then press [select/ ] . You will
	hear a confirmation tone.
	21